Electronics Forum | Sat Jun 09 04:11:43 EDT 2018 | jandon
It is Juki CAL PIECE A E3622721000 calibration jig. It is also necessary to have 508 nozzle in ATC.
Electronics Forum | Fri Feb 27 17:37:07 EST 2004 | JT
We use a JUKI 760 and a 106 nozzle.
Electronics Forum | Fri Dec 07 15:12:56 EST 2007 | teodor
Hello , I would like to collect your valued opinions what is better for beggining . Samsung CP-45NEO Juki 2060 Light Feeder Positions (8 mm) 104 80 PCB Size (min - max) 50x30-460x400 mm 50x30-410x360 m
Electronics Forum | Fri Apr 06 02:17:15 EDT 2018 | rob
@ Sr.Tech, Most of our Chinese spares are Juki & Yamaha original & still bagged, just much cheaper. They wouldn't sell machines in China if all the spares and consumables were at European mark ups. Nozzle wise the Juki 750 & 760 copies are not 100%
Electronics Forum | Fri Aug 26 16:28:27 EDT 2011 | fredc
I have a copy of the Juki catalog "e" and it shows the 750 capable of 0201s but not the 760. We have several customers that get 149s from us to place 0201s. We have also made a custom 101 with one small hole for several machines that would not re
Electronics Forum | Mon Jul 11 10:48:48 EDT 2016 | mnorthey
I have experienced this problem on a number of different machines and have found that it has been one bad nozzle causing the problem. We run Juki 3010 and 3020 and occasionally we have had similar problems. One question, is it bad placements on all 6
Electronics Forum | Tue Jun 18 11:16:39 EDT 2013 | dontfeedphils
Those are nozzle attaching and removing errors, meaning the machine is having a hard time picking up and leaving nozzles. In the head there should be a rubber o-ring, it often needs to be either cleaned and oiled (Juki has a specific oil, make sure
Electronics Forum | Thu Sep 23 11:28:57 EDT 2004 | Frank
We have placed labels using the Hover-Davis label feeders on our Juki machines and we used standard nozzles. Are your labels an odd shape where a standard nozzle won't work?
Electronics Forum | Wed May 15 05:31:53 EDT 2013 | jlawson
Also make sure nozzle retraction is ok, if nozzle shafts stick at different heights can effect laser centering stability.
Electronics Forum | Tue Nov 08 01:46:43 EST 2016 | sarason
Some machines use air blowing to not only place the part but to also help guarantee that when the nozzle is sucking it doesn't end up with a net accumulation of solder paste inside the nozzle. Juki and Yamaha spring to mind. sarason
.gif)
