Electronics Forum | Tue Nov 17 16:14:59 EST 2020 | aurash
Anyone out there willing to rent me calibration jigs to calibrate the machine offsets for one week? (location is Ireland) Thanks, Aurelian
Electronics Forum | Fri Aug 28 19:54:05 EDT 2020 | emeto
From what you explain: 1. check all movements X,Y and Z are moving free while machine is off. 2. Resit all driver cards. 3. Check interface cables or boards. Not sure if Juki is using CAN or other interface standard, but random motor errors might be
Electronics Forum | Fri Apr 02 14:21:58 EDT 2021 | sacd
deleted
Electronics Forum | Mon Aug 11 11:00:43 EDT 2003 | ravi
DEAR FRIEND, why can"t you go for the juki ke 2050/2060 m/cs. i am working woth those m/cs, excellent performance. pls thinh once before taking finel decision. thanks for sharing with you, ravi
Electronics Forum | Fri Mar 23 19:50:57 EDT 2007 | Frank
Possible head combinations to pick from multiple 12, 16, or 24mm feeders. Note: you can not mix feeder sizes for simultaneous picks. KE-2010 and KE-2050 will use 1&3, 2&4, or 1&4 KE-2020 and KE-2060 will use 1,3,R or 2,4,R or 1,4,R I prefer to s
Electronics Forum | Thu Aug 20 19:30:45 EDT 2020 | aurash
Hi Guys, I 'm having trouble with a JUKI KE2060 - multiple errors on Z, X, Y axis (it seems that the problem moves around) - the error codes are E602137 E603112 any help or an electrical diagram of the machine are highly appreciated A
Electronics Forum | Mon Aug 24 14:50:33 EDT 2020 | aurash
I'm stuck with this - if anyone knows a good technician with KE2060 expertise - please let us know. So far we checked the power going to the Z-drives, XY- drives all seems ok - no error leds on the Motor Drives (all amber) When trying to go in Ori
Electronics Forum | Mon Jul 05 11:16:50 EDT 2021 | aurash
Not sure if you fixed the problem in the meantime but try to disable the Z4 head to see if the problem actually belongs to the 4th head. Sometimes a totally unrelated problem is manifesting on the head. (I had communication problems between the XMP c
Electronics Forum | Mon Sep 05 11:51:30 EDT 2022 | jojoled
Can anybody help with Re-calibrating the Z-axis height in MS parameter , on JUKI KE760L? In MS parameter manual, there is information that these accessories are needed to recalibrate the Z-axis , can anybody tell where to get them, or ideally how to
Electronics Forum | Mon Apr 19 16:07:32 EDT 2021 | sacd
Hello. When I am originating machine Juki KE20060RL Error On Initializing appear Z4-axis. The position error exceeded the limit. I am check and diagnosed that motor Z don't move at all. Attached axis monitor shows the current state of the axis . Coul
