Electronics Forum | Tue Jun 13 12:45:22 EDT 2000 | Peter Field
Help!!! We are using Fuji CP6 machines. The nozzles use those gloss yellow (sort of fluorescent) disks to provide contrast between the component and nozzle for centring. My operators keep damaging the disks causing the machines to need recalibratio
Electronics Forum | Mon Sep 11 08:22:56 EDT 2023 | richardcargill
A lot of MELF components have solder ends that stand slightly proud of the main body where your vacuum would lift them, so vacuum leaks are most likely the culprit. Upping the Vacuum to the nozzle may help, but better thing would be to modify the noz
Electronics Forum | Fri Dec 29 16:38:15 EST 2017 | mekmat544
Hello all, I would like to ask you about difference between wettable and nonwettable solder nozzle: Are there some pros and cons for each type? Thank you. Mekmat
Electronics Forum | Fri Apr 01 08:42:03 EDT 2022 | rasch
Hi what Juki nozzle you use for xqeapa-00-0000-000000801 led?
Electronics Forum | Tue Apr 05 12:03:39 EDT 2022 | my3sons
Hello, we can offer you a great solution for handling these LED's which I'm betting are sticking to the nozzle after placement correct? We use a special tip material that doesn't stick...our part # 2014-2146 $450.00
Electronics Forum | Tue Sep 05 17:17:07 EDT 2023 | compit
1. What machine? 2. Check the ones that have fallen down for shape defects (badly adhere to the nozzle).
Electronics Forum | Sat Apr 02 09:35:59 EDT 2022 | sophyluo1985
Hi,Rasch,I'm Quinn from GOLDLAND China.What do you need JUKI Noozle, we are JUKI experts. please send me your email。sales07@goldlandsmt.com
Electronics Forum | Tue Sep 05 20:06:08 EDT 2023 | emeto
Not sure what equipment you have, but it sounds like some vacuum buildup issue. You might have some leak, or blockage or vacuum buildup components malfunction.
Electronics Forum | Tue Sep 26 11:45:06 EDT 2023 | inostranec
Приветствую. У нас была проблема с таким компонентом, он оказался с прямоугольной серединой, именно по середине сопло захватывает компонент. Нужно подробное фото компонента.
Electronics Forum | Fri Apr 20 13:25:46 EDT 2018 | emeto
This one should be easy. 1. Check your nozzle - make sure you use the right nozzle and the nozzle tip is not damaged in any way. 2. Vacuum suction going to the nozzle should be measured/checked.
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411