Electronics Forum | Mon Jul 13 19:15:33 EDT 1998 | James Vaughn
What frame is used in the FUJI 641 printer? What offset dimension is used from the leading edge of the frame? Thanks for any help on this subject.
Electronics Forum | Wed Jul 15 12:19:09 EDT 1998 | Steve
| What frame is used in the FUJI 641 printer? What offset dimension is used from the leading edge of the frame? Thanks for any help on this subject. HI JIM
Electronics Forum | Wed Jul 15 19:32:22 EDT 1998 | Eric
| | What frame is used in the FUJI 641 printer? What offset dimension is used from the leading edge of the frame? Thanks for any help on this subject. | HI JIM Hi Steve and Jim!
Electronics Forum | Sun Apr 21 11:59:07 EDT 2002 | martino
i don't know the extra cost associated with buying the comps on reels. But my suggestion would be to calculate the how much time is been wasted 'fiddling' about with these inferior tubes, and then offset this with the extra cost of been supplied with
Electronics Forum | Wed Feb 26 14:12:00 EST 2003 | csimfgeng
I am in search of a PCMCIA connector with an offset from the board of 0.250". Is anyone aware of a connector close to this and / or a source of standards on PCMCIA standards? Thanks to all who can help!
Electronics Forum | Mon Mar 24 11:09:43 EST 2003 | rdr
Excelta has some Pliers that may do this. I know that they have one for a 3-lead offset. You may try this number for more info. Ktec 18004685832 www.ktec-sys.com
Electronics Forum | Fri Feb 27 07:59:47 EST 2004 | cyber_wolf
Is it true that a DEK printer will not accept a standard 20X20 stencil. I have heard that the image on the stencil is offset as well.(you need special stencils just for DEK printers?) Do they make an adapter to accommodate standard 20X20's with cent
Electronics Forum | Mon Jan 17 15:34:38 EST 2005 | montec2000
Just a thought, but check to make sure you dont have a pickup offset in your pd or machine thats causeing your problem.
Electronics Forum | Tue May 24 13:34:34 EDT 2005 | pr
We have done exhaustive studies and found the "smell and gag and kill operators" is acceptable and is more than offset by the solder saved!
Electronics Forum | Tue Jun 14 11:02:53 EDT 2005 | Stefan
I would rather take Bobpan's advise. If the placement is calculated from the center of two fiducials, than the placement should be off by 1/2 of the distance of the two fiducials, but not by the offset of that one fiducial. However, your approach in
