Electronics Forum | Thu Jun 29 04:50:42 EDT 2023 | SMTA-70263692
This looks like it could be related to oxidation.Do you per-bake your pcb before assembly to remove any moisture inside your board panel?
Electronics Forum | Thu Jun 29 10:53:30 EDT 2023 | matouschekd
Repairing these PCBs was not an option due to the delivery amount. Oxidation is unlikely, as these anomalies were visible right after unpacking them and the humidity card was not suspicious. We have since decided not to use these PCBs as the risks w
Electronics Forum | Tue Dec 05 22:27:05 EST 2023 | padawanlinuxero
Hello, I am experiencing issues with one of my PCB suppliers. Specifically, I am having trouble with solder shorts occurring on a SOIC8 component, and always in the same pads. Upon inspection with a microscope, I discovered that three of the pads ar
Electronics Forum | Tue Mar 25 13:55:05 EDT 2014 | horchak
Ok lets put it this way. If the PCB house used a high quality mask and properly applied it to a properly cleaned surface and properly cured it, then as Dave stated above there are only two things that can destroy it. Excessive heat and overly aggress
Electronics Forum | Thu Jun 29 09:55:54 EDT 2023 | matouschekd
Yes, i tried cleaning it with PCB-Cleaner. Sadly, no success
Electronics Forum | Fri May 12 19:42:05 EDT 2023 | emeto
Have you tried cleaning these spots with anything?
Electronics Forum | Fri May 12 08:58:04 EDT 2023 | tommy_magyar
This is a defect in all IPC classes. Solder has not wetted to the land where solder is required.
Electronics Forum | Wed Jul 17 10:44:19 EDT 2013 | gregcr
Hi All, Has anyone seen or used equipment that is capable of automating the process of attaching hookup wire directly to a large SMT pad? Soldering, ultrasonic? I'm looking to see if there is a machine that is capable of automatically taking a tef
Electronics Forum | Fri May 26 04:58:19 EDT 2023 | auriga2001
I agree with the two other replies. Left alone, it is a defect. If it's just excess adhesive or coating, you can use IPC-7711/7721 'Rework, Modification and Repair of Electronic Assemblies' for guidance on removing. Section 2.3.1 explains how to te
Electronics Forum | Wed Apr 23 19:00:39 EDT 2008 | stevek
It depends on the laminate but a PWB is like any other MSL component. Some fab shops are only waranting standard FR4 laminates for 45-60 days when processed at lead free temperatures. The best thing I can say is to try some weight gain/loss experim
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
