Electronics Forum | Tue Aug 21 06:26:26 EDT 2012 | headlad
I've had a CM202DHU since new (10 years) and it is a very reliable piece of kit. I wouldn't be happy placing 0201's but if you use 110 nozzles it is capable. Just make sure that you always line up the feeders prior to running or all you'll here is mi
Electronics Forum | Fri May 27 14:15:21 EDT 2005 | ve7khz
Hi Folks, Starting a second SMT line this year and it's been (too) long since I have looked at newish machines and I am in need of some assistance with P&P machine selection. Here is what we currently have: Panasonic CM-202 chip shooter 216 8mm reel
Electronics Forum | Sun Mar 12 13:09:33 EST 2000 | Jeff Wilson
Jeff, The problem you are describing MAY be related to the push up pin setting on your component feeder units. Please verify that the push up pin height is set correctly for the feeder units, and the nozzle pick-up and placement heights are to the c
Electronics Forum | Sun Mar 12 13:09:33 EST 2000 | Jeff Wilson
Jeff, The problem you are describing MAY be related to the push up pin setting on your component feeder units. Please verify that the push up pin height is set correctly for the feeder units, and the nozzle pick-up and placement heights are to the c
Electronics Forum | Thu Sep 13 17:35:31 EDT 2007 | fnorradd
Whilst in my last job we maintenanced fuji feeders too and purchased a set up jig from alternative machinery. They do a fully intergrated (lcd display) jig which can also be used for panasonic feeders too. Best person to talk to at ALTERNATIVE is L
Electronics Forum | Thu Mar 08 16:17:59 EST 2007 | stepheniii
Your process makes a bigger difference than the machine. I worked for and OEM with Panasonics. They eliminated all 5% resistors, wider tolerance capacitors, and went with as many dedicated feeders as we could. We also staged jobs. We had one runnin
Electronics Forum | Wed Jul 14 17:33:04 EDT 2004 | Ross Clunie
The short answer is "No" the white and green feeders are not interchangble. The green feeder has a channel in it to allow the "embosed" or plastic tape to fit flat at the pickup position. If you use paper tape in this type of feeder the tape can be d
Electronics Forum | Fri Mar 24 15:20:27 EST 2000 | Chris McDonald
I have recently purchased a Tape and reel machine from V-Tech. We are using Presure Sensitive tape and we are not geting good results. Anything bigger that a SOIC14/16 gives us trouble. The cover tape will pull off on the feeder and we will lose part
Electronics Forum | Wed Apr 23 12:48:36 EDT 2008 | stepheniii
I worked for a company that did fast change overs with Panasonic machines. We also had dedicated feeders that never came off the machine. But even with over 100 different dedicated parts most set-ups still had 30 or more parts to load. All feeders w
Electronics Forum | Fri Jun 10 13:36:10 EDT 2005 | ratsalad
James, It's good that you have internal part numbers. Some CMs use customer part numbers which makes dedicated setups much more difficult. Your materials group can tell you the quantities of part numbers they buy, and that can tell you which parts
