Electronics Forum | Thu Oct 19 09:39:41 EDT 2006 | wrongway
Hello all cm212 machine the max pcb size is 15.75 x 10 inches we have larger boards then that that was why we were looking at the cm402 model. as far as the feeders go we would be buying new feeders 8mm-56mm. I was also glad to here from someone th
Electronics Forum | Mon Nov 07 09:57:43 EST 2005 | james
Does anyone else know where you can purchase parts for quad 8mm feeders instead of directly buying them from TYCO. In the past 2 months their costs went up over 50%. I order the pins already from another vendor but that is it. Thanks
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
Electronics Forum | Wed Sep 23 12:18:58 EDT 1998 | Peter
| | I am thinking of purchasing a Panasonic MV series chipshooter. If you own a Panasonic MV machine I would like to hear what you like and dislike about it. Is the service good? Are spare parts readily availiable? Does Panasonic support and follow
Electronics Forum | Wed May 22 08:26:28 EDT 2002 | cyber_wolf
Mydata uses fiducials on their feeders. I am not sure whether or not your are familiar with Mydata feeders, but its pretty basic. The feeders are actually magazines made up of multiple individual feeders. Example: There are 16 8mm feeders in (one)8mm
Electronics Forum | Wed Jun 17 17:06:29 EDT 2015 | swag
Awesome! It's good you found feeder teach. One warning: feeder teach is not slot specific (at least not when I ran GSM). Example: You teach an 8mm feeder in slot 30. You then teach an 8mm feeder in slot 31. The pick will change for the slot 30
Electronics Forum | Wed Sep 18 14:58:59 EDT 2002 | Claude_Couture
Just to add my 2 cents on the adjustment of pitch on MPA feeders: True: Panasonic do not make it easy to change the pitch on MPA feeders, the thickness of a metal part is what sets the pitch. My solution: for example, I get a 24mm X 12mm pitch MPA
Electronics Forum | Tue Sep 12 01:54:57 EDT 2006 | AR
I assume that you are referring to the same kind of mechanical feeders (older type) that are used on the Philips (Assembl�on) Topaz as well. First make sure that the right gear pulley spring is set to its stiffest position (the loop at the end of the
Electronics Forum | Tue Jan 30 10:43:18 EST 2007 | darburch
Before you do anything to the windmills check the heights in your PD's and if you are using board supports be certain that they are set correctly. The CP 65 has approx 1.8mm of travel before the pin will get stuck, as the nozzle should only deflect .
Electronics Forum | Thu Jul 15 13:41:23 EDT 2004 | Claude_Couture
We use paper tape in green emboss feeder without problems. But you can't use emboss tape in white paper feeder because the bottom of the tape needs a channel so the tape is supported on two side. Also, we remove all push pins. they are useless. We ne
winsouce.jpg)
.gif)