Electronics Forum | Mon Jul 14 12:11:17 EDT 2014 | rgduval
We used to use the Tapesplicer tool available from http://www.tapesplice.com (Sierra Electronics), in a high mix, low volume environment with MyData's (older feeders). Short review: It worked. Longer review: First, technique is everything. Splicin
Electronics Forum | Tue Apr 18 04:54:30 EDT 2006 | bayanbaru
We are using Siemens pick and place machine for chip placement. Our goal is to continuous production during component replenishment. In Siemens machine, the feeders that can be removed, reloaded, and placed back on the machine while the machine is ru
Electronics Forum | Wed May 29 07:41:33 EDT 2024 | tommy_magyar
We use the same component on many different products, never faced a similar issue. However, things I would check are: - stencil thickness (ideally 125um) - additional Z move on the parts around the relay (as suggested by kumarb) - check the packages
Electronics Forum | Mon Mar 09 16:09:38 EST 1998 | Dave Celestian
Check out some of the brokers on the internet. Look under "Used PCB Assembly Equipment". "Fastex" is one of the companies that sells used equip. There are quite a few. Make sure you get a warranty with whoever you pick...
Electronics Forum | Fri Jun 16 00:45:19 EDT 2006 | Richard Robins-Bird
Not all splicing tapes require the use of specialist tooling or splicing plates to make a join. Please see wwww.fujismt.com where a complete range of SMT splicing tapes (Joint Tapes) can be found for use with chip mounters such as Assembleon, Europla
Electronics Forum | Fri Jun 23 12:17:11 EDT 2006 | kevindebarra
Dear Greg and PWH, I see from your comments above, that you are still unsure whether splicing is for you, and mention that you have yet to find a "good splice tool." QTEK Manufacturing Ltd. based in Ireland, Mexico and Hungary provide a unique tool
Electronics Forum | Sun May 05 10:36:08 EDT 2013 | mbb
Hello, We are using Panasonic pick and place machine. I would ask if there is anyone from Panasonic to tell us which is the tape splicing method the most adequate to Panasonic feeders?
Electronics Forum | Mon May 06 07:22:23 EDT 2013 | cbeneat
Do you have the splice manual? I can email you a copy, send your email address to me I will send it out.
Electronics Forum | Mon May 06 09:01:08 EDT 2013 | mbb
Yes, we have manual splice either with a joint tape or with both clips and joint tape . Please, If you have any suggestions, email me on: mariem.khlifi@ymail.com
Electronics Forum | Mon Sep 16 18:45:26 EDT 2013 | mbb
Hello, We have currently Pick and place machine (Panasonic) with tape splicing joint sensor,the issue is, that once we want to change tape splicing for costs reason, the sensors don't detect any tape splicing .Is there anyone from Panasonic to expl
