Electronics Forum | Tue Apr 07 12:47:09 EDT 2009 | rodrigo
Hi All, Our CP6-4000 machine has this weird issue that happens once in a blue moon and only on table two. Lets say it is going to pick up a part from feeder 10. Well, it doesn't stop at the right position. It is slightly off so the thing pushing dow
Electronics Forum | Wed Apr 08 10:19:19 EDT 2009 | cyber_wolf
Go into the program screen at the machine and look at the device offsets. See if there is an offset for the feeder. I have also seen a bug on CP4 machines that is like what you described. Switching to the camera view corrected it. (wide/narrow)
Electronics Forum | Wed Apr 08 04:29:14 EDT 2009 | kircchoffs
Hi Rodrigo, is your problem occurs only at 2nd device table? how about if you transfer the feeders to the 1st device table? if it happens at both device pls your part data if there's a value at pick-up. you can also check the proper data of the de
Electronics Forum | Thu Jan 04 21:38:27 EST 2018 | dekhead
Error is occurring during move to fiducial 1 position (from board stop position)? Or during move to board stop position (from park position)? What is error displaying onscreen? Did you also just replace belt(s)?
Electronics Forum | Mon Feb 14 05:58:06 EST 2011 | vinitverma
Gabe, You now need to teach the Datum position for the front feederbar and for the rear feederbar too. If I'm not mistaken the datum position for the front feederbar is position no. 21. Just put a feeder on position no. 21 and use the camera to find
Electronics Forum | Tue Oct 18 14:24:25 EDT 2005 | Don Swenson - Honeywell
Are there any studies that document the benefits of positive etchback? Does positive etchback, particularly plasma, improve PWB reliability?
Electronics Forum | Wed Sep 19 11:40:18 EDT 2012 | dekhead
Not true... with manual screen load machines (LT / Horizon), you need to ascertain the correct position / measurement and can load to that position. Auto load machines there is a "custom screen" setting which is used to tell machine the position ("Di
Electronics Forum | Tue Jul 05 05:23:34 EDT 2005 | kentes
We have one set MPM AP25. Its prestop position is not stable,but stop position is stable. It often occur "time out" alarm when load PCB.Which one can help us.
Electronics Forum | Tue Nov 20 18:56:19 EST 2018 | dekhead
If always on... you will need to write product file as edge justified, and position stencil properly before auto-clamping takes place. If always off... you will need to write product file as center justified... and position stencil and acknowledge st
Electronics Forum | Mon Dec 11 20:34:35 EST 2000 | Dave F
I sometimes get "fuzzy" on how different companies differentiate between the activities and responsibilities of various positions. [Read: I don't understand the difference between a manufacturing engineer and a process engineer] Regardless, I'd get
