Electronics Forum | Wed Aug 29 00:13:24 EDT 2007 | slthomas
The two factories I've worked at that ran Radial Lead inserter/sequencers were both building their own products and we were able to specify our own panelization guidelines. One-half inch rectangular frame on all boards. Our universal workboard hold
Electronics Forum | Wed Jun 30 15:02:17 EDT 2004 | shk5678
Dear Michael Usually the equipment you need is: Universal Instruments 6772 Multi Mod IC Inserter. Universal Axial Inserter either a combination unit or 2 stand alone units one that sequences the parts and one that inserts them. Universal Instrume
Electronics Forum | Thu Jan 23 18:34:15 EST 2020 | slthomas
It's hard to poka-yoke loading reels onto the machine (either a inserter-sequencer or a sequencer, then getting the sequenced reels properly indexed). The only way I know of to make sure they've been set up properly is with visual inspection of EVERY
Electronics Forum | Thu May 11 09:12:19 EDT 2017 | sumote
The board may look the same, but there could be some differences not readily visible. Fix the other board and put it back in. Then rerun your process. If you still need help you should contact Don Burshnick at Alpha 1 Technologies. That guy is the V
Electronics Forum | Mon Apr 10 14:26:38 EDT 2017 | jdengler
Hi Mark, The status messages for these older UIC machines aren't always as helpful as we would like them to be. What exactly is happening? No air for the whole inserter part of the machine, or the inserter head only? It's been a while since I ha
Electronics Forum | Mon Apr 10 09:04:52 EDT 2017 | mrich208
The unit stopped sending air to the inserter suddenly. When I send the Status signal to the unit from the PC it returns waiting for NO Pushbutton/Limit. I can not find any issue with the limits or Em Stop buttons. Is there a chance that we lost an IO
Electronics Forum | Mon Apr 10 15:34:53 EDT 2017 | mrich208
Hey Jerry, The valve that sends air to the head of the inserter does not close when you press the "Interlock" button. If you press on the end of the solenoid with a screewdriver to force it the air makes it to the head. If doesn't seem like it is tr
Electronics Forum | Tue Apr 11 13:01:36 EDT 2017 | mrich208
Yes Sir, someone had replaced the fuse with a resistor and it had burned up. We had an exact board on the VCD. We swapped them and it worked! I am not sure how this forum works but now the machine will zero and say it's missing a part but the sequ
| 1 |
