Electronics Forum | Thu Feb 24 11:11:25 EST 2000 | Russ
I have seen this before, our problem was palladium termination of this component. We could not change suppliers so we use a "reverse homeplate" stencil design to put the majority of paste directly underneath the solder terminations of the component
Electronics Forum | Thu Feb 24 11:11:25 EST 2000 | Russ
I have seen this before, our problem was palladium termination of this component. We could not change suppliers so we use a "reverse homeplate" stencil design to put the majority of paste directly underneath the solder terminations of the component
Electronics Forum | Mon May 27 15:11:25 EDT 2013 | ericrr
Interesting, I could not find anything via a website search some of the links came up as 404, others a "home" page and some never went at all (or took too long) So I turned to google and found http://www.smtinfo.net/docs/tombstoning.pdf a 16 page a
Electronics Forum | Mon Jul 20 13:47:04 EDT 1998 | MMurphy
:On a dense board, a great way to reduce solderballing is to either; print paste 1:1 with pad size using a 5mil foil, reduce aperture openings by 10% of pad size or change aperture shape to "Home Plate" design. If none of these work on their own you
Electronics Forum | Thu May 29 15:00:49 EDT 2008 | slthomas
We've found that reverse homeplate reduces tombstoning significantly for us on 0603 and 0402 (the latter of which we hardly ever see).
Electronics Forum | Mon Jun 18 13:29:34 EDT 2001 | nifhail
What is the recommanded profile for board which consist of 0402 & 0201 comps. to reduce the effect of tomb-stone. Slow ramp rate ? how slow is considered as slow. Soak time 60 or 120 C,at which end should I stick to? what is the best time before reac
Electronics Forum | Wed Jul 22 11:27:25 EDT 1998 | Russ Miculich
I agree with the response and strongly recommend that you use the "home plate" design to reduce solder ball entrapment, and that the under cut for the 0402's in particular be 80% of the pad size. Solder slump is typically about 1.2 to 1 so spread wi
Electronics Forum | Wed Nov 01 14:42:17 EST 2000 | MRMAINT
We had some similar issues on one of our products.The oven profile is critical. We found that with a gradual soak ramp up it took care of about 80% of the tombstoning.The other thing that we found was pad design issues. Take a look at the sept. issu
Electronics Forum | Wed Jun 11 11:12:10 EDT 2003 | JB
We rarely use the tack-time on our machines, even if we run products that are populated with large components. ( ICS, Tant caps etc.) There is a default tacktime for each component on the component library, is called Speed Data. For the components
Electronics Forum | Thu Nov 02 22:19:32 EST 2000 | Dason C
For 0402 or less, it is prefer to start on the pad design but it doesn't help right now. Senju Metal say that they have develop one of the paste can reduce the tombstoning problem but I don't have chance to test it. Please try and post your finding
