Electronics Forum | Thu May 13 19:43:57 EDT 2004 | My Nguyen
Hello all: We looking for an effective solutions for HIGH-VOLUMN BGA RE-BALLING. (i.e. cases where we got to scrap thousands of BGA modules and re-use the chip) BGA spec. (general) W: 8mm, L: 13mm, H: 1.12 mm, No. of ball: 60, Size: 0.45mm Pitch:
Electronics Forum | Tue Jun 09 09:40:47 EDT 1998 | Wolfgang Hantz
| We offer an upgrade service for notebooks with 486 SX/DX CPUs up to 586-133 MHz using the AMD 5x86-133 MHz CPU in the PQFP package. We are pretty succesful with this service and until today we did more than 1000 notebook upgrades this way. | Now,
Electronics Forum | Wed Jun 10 14:22:07 EDT 1998 | Chrys
| | We offer an upgrade service for notebooks with 486 SX/DX CPUs up to 586-133 MHz using the AMD 5x86-133 MHz CPU in the PQFP package. We are pretty succesful with this service and until today we did more than 1000 notebook upgrades this way. | | N
Electronics Forum | Sun Jan 14 12:42:35 EST 2007 | SMTRework
I think the main cause of this condition is #3 because both #1 and #2 never change from board to board, these are identical boards with identical BGA revisions. These BGA's (as stated before) are about 3 years old.. I don't believe they are lead free
Electronics Forum | Mon Feb 16 15:47:54 EST 2004 | Jim
I have about 200 PCB's from which a 20mil pitch QFP must be removed, cleaned and re-used (will place them back in trays for the P&P machine to place the parts on new boards). My intitial concern is: how can we remove the parts in an efficient manner?
Electronics Forum | Tue Jul 16 01:28:48 EDT 2002 | ppcbs
Our BGA Rework process has resulted in 100% yield. We always bake BGA chips at 125 degrees C for at least 8 hours before installation. We always bake loaded boards at 90 degrees C for at least 12 hours before BGA removal. Any parts that went throug
Electronics Forum | Fri Jan 21 18:47:14 EST 2000 | Ashok Dhawan
This massage is for clarifications on storage and handling of Moisture sensitive parts: Does chip resistors,capacitors and inductors need vacuum packing during usage life? For repacking of FPDs to limit reuse, is it necessary to use vacuum seler or s
Electronics Forum | Fri Sep 24 13:38:16 EDT 2004 | Nick Prince
The re-use of any component has commercial implications as weel. If you check the data sheet for the component in question you will find the reflow profile, usually there will be a "Max No of Reflows". I have never seen this number higher than 2. If
Electronics Forum | Fri Jun 10 12:48:55 EDT 2016 | deanm
Kyle,thank you for steering me back on track. For relays and connectors I like Tom's suggestion provided you are allowed to add materials to your assemblies. An instant adhesive or perhaps a chip bonder (used in SMT) may work if the preheat is high e
Electronics Forum | Thu Jan 11 09:19:56 EST 2007 | SMTRework
I know this is not the correct forum to post chip "reworking" questions but you guys have been very helpful in the past. My question is this, when we rework BGA components most of the time the solder reflows at a normal temp and all is well. On occ
