Electronics Forum | Tue Sep 06 09:59:32 EDT 2005 | slthomas
Find out if you can separate the dehumidifier controls from the heating/cooling controls, without adding an air handler. Otherwise I think you'd need to add a dehumidifier that runs independantly. Don't forget that system capacity has to be rated fo
Electronics Forum | Thu Aug 10 10:00:40 EDT 2006 | slthomas
Temp. and humidity levels are dependant upon your chemical (paste and adhesive) specifications. Ballpark I'd say 70�F and 40%-45% RH are good targets, as our paste spec. says optimal ranges are 70-77� and 30-70 RH. As far as air quality, if you bui
Electronics Forum | Thu Aug 02 09:56:57 EDT 2012 | mccabekev
We currently operate a procedure of keeping fresh tubes of solder paste in a fridge. When it is required we remove the required quantity from the tube and return the tube to the fridge before it warms up to room temperature. We then store this at r
Electronics Forum | Thu Oct 14 22:01:18 EDT 1999 | JEff
Is there a equirement on how clean an area/room should be?
Electronics Forum | Mon Aug 25 20:31:58 EDT 2003 | davef
Handsome: Welcome. There is always room for another balding, fat, aging SMT smooth-talker here on SMTnet.
Electronics Forum | Tue Jun 28 10:01:24 EDT 2005 | mskler
What is your stencil cleaning procesor.It sould not be wet after cleaning & what is room tempreture.?
Electronics Forum | Wed Sep 07 21:58:21 EDT 2005 | smartasp
Hi Steve Will try your sugestion and C. Thanks. Smartasp
Electronics Forum | Mon Jan 14 07:52:32 EST 2008 | mmjm_1099
Yes we could but more room and chance of machine not going into error while on bypass and running.
Electronics Forum | Fri Apr 28 11:12:39 EDT 2017 | mmjm_1099
You might want to attempt doing this in a clean room.
Electronics Forum | Fri Mar 15 09:38:39 EDT 2019 | kahrpr
ACI is good right next to the airport. They have actual equipment so training is more than class room.
