Electronics Forum | Wed Jul 06 12:19:36 EDT 2011 | don7888
Hello Can someone recommend a cost effective solder printer that does not require stencils. We are currently using a Speed Print 200 machine but this requires us to spend a lot of money on stencils and wait long lead times for these to be manufactur
Electronics Forum | Wed Feb 23 22:56:46 EST 2011 | jeffr
When I enter the "Setup Table Contact" menu, then press "Load PCB" the squeegee head should move to a mid position that I can set the squeegee height, but instead it moves the squeegee head to the front limit and displays a red error message about th
Electronics Forum | Fri Dec 20 04:07:25 EST 2002 | Roger
Although everything that has been said earlier is sound advice for achieving good printing results, I strongly believe your problem is your manual printer and its inability to accurately control the speed at which the PCB separates from the stencil a
Electronics Forum | Thu Aug 12 21:08:39 EDT 1999 | ScottM
| | | | Hello | | | | | | | | Having a problem with bridging on 20mil pitch qfp, only on the lead groups where squeegee goes over width of apertures. Using MPM sp-200 semi-auto, chem-etch stencil, 9-10mil width opening | | | | 100 durometer blade. G
Electronics Forum | Fri Nov 12 03:57:17 EST 2004 | pioneertechnology
Hi All For the past 8 years we have been screen printing paste succesfully using hard rubber blades. Over the past 12 months we have changed paste from lead to lead free, the board size has changed from 300x200mm to 120x90mm and we have also moved
Electronics Forum | Thu May 06 09:24:06 EDT 1999 | Joe Manzur
Kevin, We are also looking at printing adhesive. Our application involves printing glue on the underside of the board, once it has gone through the dip, axial & radial process. In otherwords, there are leads cut and clinched and we have to mill out
Electronics Forum | Fri Jun 13 20:53:49 EDT 2003 | quantass
= 40% reflective, Multistable - It makes use of ambient light to be viewed and is multistable so that once power is applied to change the display no additional power is required to sustain the static, color image, at least not for a long period of ti
Electronics Forum | Thu Oct 02 17:00:44 EDT 2008 | davef
Is that accurate? If so, what are your aspect & area ratios? [Similar to the JerryS comment above.] * You say, � � and the average height is very high: nearly 200 pct.� => Our troop can make paste that height too. They snap the stencil-off a fast as
Electronics Forum | Thu Aug 12 20:31:57 EDT 1999 | Kelly Morris
| | Hello | | | | Having a problem with bridging on 20mil pitch qfp, only on the lead groups where squeegee goes over width of apertures. Using MPM sp-200 semi-auto, chem-etch stencil, 9-10mil width opening | | 100 durometer blade. Getting "tails" o
Electronics Forum | Thu Aug 12 20:48:05 EDT 1999 | JAX
| | | Hello | | | | | | Having a problem with bridging on 20mil pitch qfp, only on the lead groups where squeegee goes over width of apertures. Using MPM sp-200 semi-auto, chem-etch stencil, 9-10mil width opening | | | 100 durometer blade. Getting "
.gif)
