Electronics Forum | Tue Jan 09 06:45:08 EST 2018 | micomac
We have Europlacer flexys pick and place. We have had 3 turret collisions with 8mm feeders arising from the tape retaining clip coming free during operation. Have asked Europlacer for part numbers for safety catches that a technician told me existe
Electronics Forum | Mon May 27 12:55:28 EDT 2002 | jgeissler
We are experiencing an increased amount of machine stoppage due to brittle 8mm cover tape. The issue does not appear to be feeder or part/manufacturer specific. Taking a foot of cover tape and pulling it from the ends results the cover tape snappin
Electronics Forum | Tue May 28 17:02:46 EDT 2002 | dougt
I've had problems with this in the past, pretty sure it was due to age. Had a couple of old reels of dummy parts that would not allow for any type of stretching of the cover tape. I have also seen where the cover tape appears to shrink and it pulls
Electronics Forum | Sun Jun 26 21:26:45 EDT 2011 | fholtman
I have a dead motor in one of our triple tracks, one of the three that advance the tape. was just wondering if anyone has been able to order this or any other motors direct or if they all have to come through Siemens. thanks in advance for any replys
Electronics Forum | Mon Dec 25 14:23:17 EST 2017 | robertorocco
This machine is OK. The price is 7000 euro with 10 feeders 8mm
Electronics Forum | Thu May 04 10:14:31 EDT 2017 | sssvajunas
If 8mm component tape is cut off until components (no empty tape) how can I load it in to a ax feeder without throughing compoents?
Electronics Forum | Sat May 04 13:06:40 EDT 2024 | erikfriesen
We are using these Cover tape extenders https://smtsupplies.com/products/cover-tape-extenders-8-12mm-yellow-500-per-box The problem we have is that we have on 8mm feeders is that these leaders are harder plastic, and we have to put fishing weights o
Electronics Forum | Thu Sep 26 16:29:02 EDT 2002 | pjc
Because most placement machine mfgs' feeders vary in width sizes its best to get the reference from them. Like how many 8mm slots does their 16mm consume, and so forth. Std. Sizes I've seen are: 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, 88mm, 10
Electronics Forum | Fri Sep 27 10:01:25 EDT 2002 | stefwitt
chips up to 1411 ( I have not seen a 1411 component yet, but 1210 is a good number ) in 8 mm, IC up to SO8 in 12 mm, IC up to SOL 20 fit in 16mm tape. This is just a basic rule. You may also find SO 20 in 24 mm tape. More important is the reel width,
Electronics Forum | Thu Sep 26 15:33:04 EDT 2002 | genny
Does anyone know of a handy dandy reference guide showing what the standard feeder tape size is for most common SMD packages? Just trying to figure out what the capacity REALLY is of all these pick and place machines I'm looking at, that state capaci
