Electronics Forum | Wed Dec 09 09:47:32 EST 2009 | dyoungquist
I am curious as to why you need to mix.... We use a 500g cartridge with air gun. Our process is remove the cartridge from the fridge, allow it to warm up to room temperature before inserting into air gun, then apply bead of paste to the stencil. N
Electronics Forum | Fri Dec 01 16:02:33 EST 2000 | Jim M
Thanks for your reply. I 've tried to clarify and answer your questions. The water soluble paste used is WS3060, type 4. The boards are sent through a inline di cleaner after reflow. There is a hot Di waterwash, rinse and then hot air to dry the wa
Electronics Forum | Sat Sep 07 06:57:33 EDT 2002 | mk
I agree but, are there really heavy metals in this water? Our process is as follows. Print Paste Reflow Board (no components, water soluble paste only) Wash Board Same reflow profile for almost every order so no solder balling issues etc. Carbon an
Electronics Forum | Tue Aug 27 08:13:29 EDT 2002 | mk
Our company uses a conveyorised aqueous cleaner to wash printed circuits after water soluble solder paste is reflowed. The system is closed loop with carbon and resin filters. The water eventually will get dirty. Can it be dumped? Treated? How do y
Electronics Forum | Tue Feb 22 12:42:53 EST 2005 | griinder
I was curious if anyone else has ever added water soluble flux to water soluble solder paste that is only a few days old, but is too dry to use in production. Also, are there any known bad side effects to this process. I have already searched the arc
Electronics Forum | Wed Jan 30 17:23:07 EST 2013 | dyoungquist
In response to hegemon... This is not a recommended practice but..... We have added a few drops of water soluble flux to our water soluble solder paste when the paste is on the stencil. This was after the paste had "dried" out a bit. We have had
Electronics Forum | Thu Dec 16 18:36:01 EST 2004 | mattkehoe
We use water soluble solder paste. When it gets a little dried out, can we add something to rejuvenate it? Liquid flux? We do not place components, just print and reflow the solderpaste so solderballs, spattering, and other issues like those are of
Electronics Forum | Tue Feb 22 17:57:32 EST 2005 | Austinj
Most solder paste has a shelf life of 1 week at room temperature after opened, if resealed at the end of the shift/day. Most shelf lives are 4-6 months at 40F (refridgerated) or 1 month at room temp (unopened/sealed). Recommended stencil life is appr
Electronics Forum | Thu Mar 22 14:12:09 EST 2001 | slthomas
Interesting...the very reason we use water soluble paste on some of our boards is for that reason, although I've never been able to get anyone to show me something in print that supports it. It's just what engineering has told me. We currently have
Electronics Forum | Wed Aug 28 10:16:12 EDT 2002 | Jim M.
Sam We install a lot of die in the SMT room using same process as SMT parts.Water soluble solder paste is used for attachment of die to ceramic and boards. Biggest problem i found is the adjustment from installing the die in the bonding area. The t