Electronics Forum: sequence step (Page 1 of 3)

Topaz placement event sequence question (long, rambling)

Electronics Forum | Thu Sep 13 10:49:24 EDT 2007 | slthomas

If someone knows specifically what the sequence of events is in a Topaz placement step I'd appreciate it if you could share that with me. We've developed an intermittent problem with ours where it places the part and immediately stops with E0873. T

Quad IVc Fiducial Alignment

Electronics Forum | Fri Feb 24 09:24:08 EST 2012 | bobpan

1. You should be running the machine from the computer and central contoller. (not the handheld or run button on machine) 2. What is the tep commands in your sequence steps....I think you need to have tep vision as the first step and tep vpass at the

Quad IVc Fiducial Alignment

Electronics Forum | Fri Feb 24 13:21:42 EST 2012 | bobpan

The correct sequence steps should be: 1. tep hold 2-? pick/place/nozzles tep vpass goto 1 This is out of the programming manual.

QUAD 4c big placement delay

Electronics Forum | Wed Apr 26 11:58:32 EDT 2017 | bobpan

Mod code 7 is a placement delay.....changing it will slow your entire program down. If you just want to slow it down for 1 placement.....you have to insert a mod code change in the sequence steps....this is easily done in central controller. Good L

Quad 4c programming question

Electronics Forum | Mon Mar 07 06:51:31 EST 2011 | mosborne1

Tim you can do your image repeat after you place the whole panel with nozzle #1. In your sequence step program place all with nozzle 1. You can then change to nozzle#2 then place the whole panel with nozzle number 2. This will be one nozzle change. I

Quad 4c Sequence lead inspection electrical test qa...

Electronics Forum | Mon Mar 11 04:57:31 EDT 2013 | bobpan

You really should edit your programs in central controller where it is much easier to follow the commands shown and to follow the extent data to see whats attached to each part/pickup. The hht can quickly cause issues when the wrong button is presse

Quad IVc Part rejection issue

Electronics Forum | Wed Sep 12 06:13:22 EDT 2012 | bobpan

Glad i could help.....now this is a little harder....been a long time since i have done comp. fids and i dont have a machine to test....but check these things... 1. In the teach menu.....there is teach component fiducials. Make sure you do this with

Quad Machines? Good Points / Bad Points

Electronics Forum | Thu May 22 17:17:37 EDT 2003 | ssnow

I have to agree with you on the documentation side of the manuals ,they were written before they ever hired a tech writer, when they finally did they wrote manuals for the newer stuff and let the older machines alone. The basic's are pretty straight

Quad IVc AutoProgram

Electronics Forum | Mon Apr 08 07:20:56 EDT 2013 | leemeyer

What operating system are you using ? I have found that you need to stay with a DOS based operating system. I am running DOS 6.2 with windows 3.11. I tried win 98 and although it seemed to run properly, I would have problems in the final program. XP

Quad 4C part placement rejection

Electronics Forum | Wed Nov 16 14:44:31 EST 2011 | olddog

Bobpan, thank you for your speedy response. As to the items you noted: 1. I did a test of Funct 30 for the first 5 nozzles, 2 times each as follows: noz1 Ht=215 & 219, center=1005 (all nozzles all tests), run out 2.2 & 2.7. Noz2 Ht=228 &228, runout=

  1 2 3 Next

sequence step searches for Companies, Equipment, Machines, Suppliers & Information

Voidless Reflow Soldering

Training online, at your facility, or at one of our worldwide training centers"
See Your 2024 IPC Certification Training Schedule for Eptac

High Throughput Reflow Oven
2024 Eptac IPC Certification Training Schedule

World's Best Reflow Oven Customizable for Unique Applications
Best SMT Reflow Oven

High Precision Fluid Dispensers
Assembly Automation Technology

"Heller Korea"