Electronics Forum | Thu Feb 15 12:56:31 EST 2024 | micropak
Never needed to disable anything on SiPlace but I think it should be in KONFIG.MA file, you need to change the ID & TYP of the relevant KOPF in the relevant Portal (Gantry). For single gantry machines, the KOPF information in Portal 1 is relevant. B
Electronics Forum | Tue Feb 05 13:14:27 EST 2019 | youngbuck
Hi Steve, Have you took the star completely off the Gantry. There are the 12 hoses to the star if Segment 1 connection hose is messed up everything will be off because everything gets measure off of Seg.1. Also, you could start eleiminating the probl
Electronics Forum | Fri Feb 01 11:17:21 EST 2019 | youngbuck
Hi, Make sure to check any cracked, pinched, kinked hoses. Also when taking the whole gantry off there are clear hoses that can get pinched. Also, may want to changed the vaccum measuring board. Is this a S20 or F4,f5 or hs50 Thanks,
Electronics Forum | Thu Apr 28 03:58:52 EDT 2022 | erici
We are having problems with our Siemens Siplace S27 machine. The machine is giving the error - Y-axis Faulty initialization of Motor. We replaced the Y motor card and swapped also the servo control cards on the two gantries. Still will not initiali
Electronics Forum | Tue Aug 28 11:40:03 EDT 2007 | lloyd
As in the previous reply, When the machine is powered up don't press the start button. Just wait until the software has loaded then go into Sitest (you may need to logon as SERVICE). In the gantry or head menu's you should find the nozzle configurat
Electronics Forum | Tue Apr 11 11:40:41 EDT 2006 | global
We have a Siemens S15 and an F3, which we have only had now for about 4 months. We have an old line of HS180s and an SP120 and have found that the S15 and F3 do not have the option to skip a part if one runs out during placement. We from time to time
Electronics Forum | Mon Mar 08 04:51:43 EST 1999 | John Godfrey
| We are currently looking into purchasing a high volume, medium mix production line. We are considering several different vendors and I would like to know if current users of Siemens equipment are happy. Are the machines maintenance intensive? Ho
Electronics Forum | Fri Jun 26 06:32:33 EDT 2020 | dltechltd
Dear Victor, We have figured out what caused the error: One of it's MVS ICOS card had parity error (The MC reported that error too as seen in the previous pictures). We could see RED LED Light on the card, and we have pulled out, and checked: PAR_ER
Electronics Forum | Tue Mar 16 15:43:11 EST 1999 | Mike Greening
| | We are currently looking into purchasing a high volume, medium mix production line. We are considering several different vendors and I would like to know if current users of Siemens equipment are happy. Are the machines maintenance intensive?
| 1 |
.gif)
