Electronics Forum | Mon Feb 27 05:48:29 EST 2012 | sparrow
Hello, does anybody use a Kirsten jet wave soldering system? we think of implementation of wave soldering process at our facility and Kirsten jet wave systems with protecting liquid looks pretty attractive to us (N2 is no needed). Can anybody, w
Electronics Forum | Wed Aug 25 09:14:20 EDT 2010 | ozgurv
Dear all, Is there anybody who has got experience about the hollow jet wave soldering system? Is it usefull for SMD devices such as fine pitch components and Can it solder components which are on thick PCB's? Thanks.
Electronics Forum | Wed Mar 21 06:13:42 EDT 2012 | sparrow
Hello Hunzo, many thanks for your detailed reply! By the way, I am well familiar with the smell of Galden liquid that is used in vapour phase soldering ovens. Does ADL have the similar smell?
Electronics Forum | Wed Mar 07 02:29:22 EST 2001 | Cosine Theta
Barcode needs a light colour backgroup so that the scanner can read. No way you can mark on the solder mask and become readable. I found most of the time the investment cannot be paid back within 5 years. Most of the time it is product requirement th
Electronics Forum | Wed Mar 07 20:37:38 EST 2001 | davef
I agree. The bar coded label you use should not be affected by the solder mask of the board. The label should have sharp contrast between the segments of the code to modulate the returned light and allow the reader to discriminate between light and
Electronics Forum | Fri Jan 28 19:26:51 EST 2011 | jlawson
Milara has a combined Stencil printer + jet Printing ??? Print and then jet print areas not printed or top up prints.
Electronics Forum | Fri May 28 13:44:15 EDT 2010 | emrtech
good point Sibbe, we also do a lot of engineering and changes from rev and having to order a new screen very time is a pain and money spent. no more having to wait for a screen to keep production running. has anyone been working with a solder jet pri
Electronics Forum | Tue Feb 10 17:38:22 EST 2015 | mbartel
low volume high mix, looking for advice on what i should get, a stencil machine or a jet printer for smt solder paste. used/new and companies i should look into?
Electronics Forum | Thu May 27 16:29:26 EDT 2010 | jlawson
Milara has released a inline stencil printer with jet printer in same machine - combi functionality. Not as fast in terms of jetting speed as mydata (uses Asymtek jet head) Can print only, jet only or both to say top up paste on certain areas after
Electronics Forum | Sat May 29 13:53:18 EDT 2010 | jandon
MY500 minimum dot diameter is 0.33 mm (0.013”) so you still need stencil for smaller dots. You are liable to couple of jet printing solder paste manufacturer and there where I live, only official Mydata distributor can sell those solder pastes. Also
