Electronics Forum | Mon Jul 30 21:29:34 EDT 2001 | kennyhktan
Hello Michael & All, Thanks for the feedback. Months ago we receive a number of reject concerning one of the 0805 & 0603 chip capacitor mising (with joint remain on pad)and seriously solder joint fracture. From there I had do some investigation
Electronics Forum | Mon Nov 19 20:15:39 EST 2001 | davef
Now, that is one thickass board!!! The rant first: If our �board supplier changed our board surface finish on� anything without our approval, the board supplier would be an �X�. Life has enough surprises. And of all the flat finishes available, h
Electronics Forum | Thu May 29 14:48:45 EDT 2014 | olek
On one of our designs, we use LEDs Lite-On/LTST-S110TB (SMD). PCB footprint was designed according to manufacturer's recommendations. However, our vendor has problems with assembling these parts. Some parts are tilted, other have bad solder joints or
Electronics Forum | Thu Mar 02 16:06:32 EST 2000 | eLDON sANDERS
Gentlemen, I too have been atacked by that "soldering to gold" and will add my 2 cents. I also had parts that would pop off the board when the fillet looked perfect. After lots of pain, experimentation, and sleepless nights, I solved it through a
Electronics Forum | Thu Mar 02 16:06:32 EST 2000 | eLDON sANDERS
Gentlemen, I too have been atacked by that "soldering to gold" and will add my 2 cents. I also had parts that would pop off the board when the fillet looked perfect. After lots of pain, experimentation, and sleepless nights, I solved it through a
Electronics Forum | Mon Jun 18 10:14:30 EDT 2001 | surachai
HI ALL; I WOULD LIKE TO KNOW THAT ANYBODY CAN RUN GLUE PRINTING PROCESS WITH 0402 CHIP AND PASS THEM TO WAVE SOLDERING PROCESS ,PLEASE GIVE ME THE INFORMATION ABOUT THEM . 1)HOW WIDE OF APERTURE DO YOU OPEN ON YOUR STENCIL? 2)HOW MANY YIELD OF THIS P
Electronics Forum | Fri May 22 12:42:43 EDT 2015 | deanm
Sr. Tech, you are right in that there is no verification of the profile. We are a Class 3 high mix OEM. We have visual inspection after SMT. We have not seen problems with wetting, grainy solder, cold solder, charred boards, etc. that would indicate
Electronics Forum | Mon Oct 22 17:37:51 EDT 2001 | davef
I�m aware of no such standard. There may be something in Euroland [ie, IEC, etc.] TM-650 �Test Methods Manual� has procedures for measuring various types of contamination, such as: * 2.2.25 �Detection Of Ionizable Surface Contaminants� * 2.2.27 �Cl
Electronics Forum | Wed Sep 23 00:06:34 EDT 2020 | SMTA-64387098
I have modules that come with a 4 x 2 pin header. The problem is the pins must be oxidized as they do not take solder (no wetting occurring). This occurs whether solder in our wave soldering machine or soldered by hand. I tried cleaning the module i
Electronics Forum | Thu Jan 14 11:06:33 EST 1999 | Earl Moon
| | Some of my friends ask me if sombody use lead free solder ball on BGA, espically PBGA packages. I wonder if 96.5Sn/3.5Ag (m.p .221 oC) or 58Bi/42Sn (m.p. 138 oC) would be suitable candidates? Do you have any experience on this subject? | | | | K
