Electronics Forum | Sun Sep 02 13:45:06 EDT 2007 | mun4o
Hi, we use om338 from alpha metals in our smt production lines.I wont change this solder paste with kester em 918.Is anybody use this solder paste?what yo think abaout this paste.Is it good?
Electronics Forum | Mon Feb 04 05:07:33 EST 2008 | mun4o
Hi, we have about 100L kester 108 - soldering flux thinner.That is thiner for Kester 2235 and some other fluxes.But we have not use this flux already, and I don't know what I can make with the tinner.Could you help me - what is chemical composition
Electronics Forum | Thu Mar 23 13:48:07 EST 2000 | John Storjohann
A number of years ago I used a Kester product called Solder Saver. It is a thick liquid that one squirts onto the dross on a hot solder pot. It separates out the solder leaving a crust of almost clean dross. Unfortunately a mask is still required. Th
Electronics Forum | Mon Jul 31 20:34:58 EDT 2017 | zsoden
Hi all, it has been a bit of a delay but I've finally had a chance to do some further investigation on this. First off, we spend some time to clean the solder bath using Kester Solder Saver and scooped out a lot of crap. We then added about 5kg of
Electronics Forum | Thu Jun 03 21:27:58 EDT 2004 | davef
We know of two "solder savers" 1 Kester Formula 5749 Solder Saver: We believe Kester Formula 5749 Solder Saver to be a new formulation of Kleenox. Kleenox works. It helps separate the solder entrapped in the dross. [One tiny warning, one chemical
Electronics Forum | Fri Jun 04 13:21:18 EDT 2004 | J
I apologize I was referring to the Kester Solder Saver.
Electronics Forum | Thu Nov 17 03:34:51 EST 2005 | cangly
Hi, We have a board with over 100 chips (mixed size) and some long Connector DIP through out Wave solder with many issues of no solder and solder bridge, (using clean flux with bubble fluxer and Kester solder bar). Currently we tried to reduce the de
Electronics Forum | Fri Mar 22 14:19:38 EDT 2019 | gregcr
Thank you ProcEng1 Nordson sent me a flux suggestion list: No Clean: 1. Kester Select 10 2. ALPHA EF-2210 3. AIM FX-16 Water Sol: KESTER 2331-ZX Nozzle Tinning: SUPERIOR #75
Electronics Forum | Fri Apr 22 10:51:49 EDT 2011 | blnorman
Kester sells preforms.
Electronics Forum | Thu Nov 17 21:46:48 EST 2005 | C. Kolokoy
With DIP type components, a sub-par fluxing method (foaming a no-clean), and a chip wave where one is not needed are formulas for bridging and insufficient wetting. If you have SMD's on the wave solder side of the board greater than 0603, and no SOT
