Electronics Forum | Thu Jul 08 04:26:27 EDT 2010 | bks
Hello, this is my first post in this forum, but sometimes I visit it to get some news. Now we have an issue and I need your advice. Few months ago we were awarded with a project that use PTH components. We solder these components on Wave soldering
Electronics Forum | Thu Jul 08 09:29:10 EDT 2010 | mb_mfg
There are several things that can be done. Shortening the lead length should eliminate bridging between lead. We had done a project several years ago where the customer had shortened the leads to almost flush to the board, preventing any chance of
Electronics Forum | Tue Dec 14 13:39:16 EST 1999 | KA
Hello Everyone! I have encountered a situation where I have surface mount components on the backside of the board and I need to wave all the through hole leads on the backside as well. Can this be done? I thought of the possibility of adhering the
Electronics Forum | Mon Jul 22 14:01:31 EDT 2013 | jax
HMP can mean a lot of things, although it is normally used as the generic name for one of the following alloys: Pb93.5 Ag1.5 Sn5 (296°C-301°C) Pb95 Sn5 (308°C-312°C) Pb97.5 Ag1.5 Sn1 (309°C) If you are talking abou
Electronics Forum | Fri Jul 29 09:31:29 EDT 2005 | lupo
Hello, I am not familiar with Inertec but have some expirience with selective soldering process, My oppinion is that the wave and slective soldering are not the same game. In Selctive soldering process is very important the layout design. If use th
Electronics Forum | Wed May 28 05:31:17 EDT 2003 | dougie
Hi, Can someone please give me an IPC standard number or similar for decal design when wave soldering SMT components on the underside of a board. Hopefully a document exists detailing design rules, the components ideal attitude to the wave, suitabil
Electronics Forum | Wed Jul 14 07:47:41 EDT 2004 | pcbrown
I am looking for effective ways to secure through-hole components (non-clinched) to the boards for wave soldering. Can someone share their ideas or methods? We've tried vacuum packing & tacking/masking, but there must be better ways. I'd appreciate a
Electronics Forum | Fri Dec 17 09:24:46 EST 1999 | Marty Wetzel
KA, Joshua makes a good point. A wave solder fixture will allow you to process your double-sided boards without having to add the epoxy step. The one time fixed cost of a fixture is quickly offset by the time that you save by not gluing your SMT.
Electronics Forum | Thu May 29 13:37:36 EDT 2003 | russ
IPC-SM-782 and IPC-CM-770 have somw pretty good info. Russ
Electronics Forum | Tue Aug 01 16:30:11 EDT 2006 | russ
What are you looking for? Follow the MFGR spec for paste and reflow info.
