Electronics Forum | Sat Jul 14 08:56:39 EDT 2001 | davef
Cal is right on target. I'll expand on his points. BGA solder perform suppliers: * Winslow Automation: http://www.winslowautomation.com/ * Galahad 12784 Tulipwood Circle Boca Raton, FL 33428 561-487-0271 galahad.inc@usa.netemail: BGAKIT@concentric
Electronics Forum | Thu Dec 17 12:23:46 EST 2009 | leemeyer
Take a look at http://www.habasit.com. They supply tooling to make these belts. I found it more cost effective to have the belts made for me at a local belt supply buisiness, the tooling is expensive.
Electronics Forum | Fri May 05 02:22:39 EDT 2017 | beckysu
Our company supply repair service for JUKI lasers, sorry for disturb you, may you need it in the future. Have a nice day. Best Regards, Becky Su becky(at)hysmt(dot)cn
Electronics Forum | Tue Oct 28 09:23:49 EST 2003 | Gary Camac
We had the same problem recently. It turned out the power supply had a problem. We sent the supply out for repair, but it couldn't be fixed. We found a replacement supply for around $250 that required the drilling of some new mounting holes. This
Electronics Forum | Sat Jan 07 04:00:12 EST 2017 | soldertraining
Electronic components distributor offering semiconductors, interconnects, electro-mechanical, power supplies, PCB Repair, BGA rework and measurement equipment. In order to select the electronic distributor we must remain updated with Technology news
Electronics Forum | Tue Nov 29 11:45:35 EST 2016 | ttheis
I was able to repair the original power supply for the printer again with parts from another similar power supply on ebay. At first the machine didn't power up properly even though the supply voltages were all good on a volt meter when tested befor
Electronics Forum | Mon Feb 11 15:43:18 EST 2013 | fredcalkins
I am not a quad feeder mechanic but I woud assume your worst ones are dirty with sticking parts or have worn out parts. Perhaps Scott Heck could help you with parts, scotheck@aol.com I know he rebuilds older factory feeders to work with 0402s and 02
Electronics Forum | Fri Dec 21 09:36:48 EST 2007 | mulder0990
Measure the O-ring if you are able to get to it and take the specs to any industrial supply shop, online or otherwise, and see what their price is. I repair Fuji feeders, so I cannot really help on the size but that is how I get the O-rings for my f
Electronics Forum | Fri Jun 20 09:20:04 EDT 2008 | ampearl
I need a technical specialist to turn-on, trouble-shoot, modify, repair, and test the power supply prototypes at the printed circuit assembly and instrument levels. This person would be involved in setting up both manual and automated tests, making m
Electronics Forum | Thu Jan 27 05:24:06 EST 2000 | Scott Davies
From personal experience, I agree with Dave that pre-owned equipment is often a more favourable option than the OEM route...provided that the equipment is purchased from a reputable source, supported with some kind of warranty, and be aware that some
winsouce.jpg)
