Electronics Forum | Wed Aug 20 06:33:16 EDT 2008 | benefon
If this is machine is of the same type of construction as our 248 with the pneumatic table sliding mechanism, check the 'table out sensor' in the 'digital inputs' section of the diagnostics menu. rgds AR
Electronics Forum | Tue Sep 16 15:23:59 EDT 2008 | bwelch
Does anyone one have any recommendations on type of table top to use for "tabletop" AOI machines. Someone suggested to me of using slate table tops or heavy duty suface tops. Does anyone have any ideas?
Electronics Forum | Thu Jan 29 10:05:28 EST 2009 | soudomphong
I am looking for rolling table z-axis p/n 00320165-02. for rv-d head siemens S20. Anyone know where to get it or have it, please contact me via email seth.oudomphong@variosystems.com Thank you. Seth
Electronics Forum | Tue Sep 01 12:20:47 EDT 2009 | fujiphil
Manually load the board and activate the solenoid for table up/down. Goto I/O then check the status of the sensor. if the sensor was tripped when table is down, removed the pin and check for foreign objects. Or check the hole of the pcb, maybe the si
Electronics Forum | Thu Sep 16 18:25:22 EDT 2010 | slwolbert
Thanks for the response Travis. I'd think the table would inch or move if it were stuck inching keys. The table would eventually trigger one of the overtravel sensors on this ancient machine. Much Appreciated, Steve
Electronics Forum | Wed Apr 20 11:37:17 EDT 2011 | markhoch
Hello, I'm looking for a supplier for an ESD Cover that I can use to cover my Feeder Tables that are not in use. (I'm thinking of something similar to an ESD Safe BBQ Grill Cover) Does anybody have these, or know where I might be able to find them?
Electronics Forum | Thu Feb 23 13:52:01 EST 2012 | cobham1
We are looking to puchase a table top conformal coating system. Can anyone tell me what to look for and are there systems that wont brake the bank.
Electronics Forum | Wed May 09 08:48:51 EDT 2012 | leemeyer
Try going into the program definition screen and delete the permanent table top. Then shut down and reboot. The permanent table top will be re created upon reboot.
Electronics Forum | Thu Jul 25 14:44:34 EDT 2013 | falvarez
Im needing an Rising table motor for Dek Horizon, but with a 4000 count encoder, because that motor i bought become with a 1000 count encoder and not worked. any suggestion?
Electronics Forum | Wed Aug 05 18:36:19 EDT 2015 | caurbach
John, I assume you mean 60%, not 65%. J-STD-033 has a derating table for floor life which accounts for conditions other than 30C/60% RH. Table 7-1 is what you're looking for I believe. Adam