Electronics Forum | Wed Jul 13 08:42:02 EDT 2005 | mikeattekfab
I am looking for an additional Tray wagon for our Mydata machines, anyone have a working one they do not need? Please let me know. Mike
Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Tue Feb 03 12:39:16 EST 2009 | markhoch
Not sure what your job quantity is, or how many total parts you have to place, but we've had similar issues in the past trying to place domed LEDs. We had better luck cutting the tape into 25 or 50 piece strips and using double-sided tape to put the
Electronics Forum | Thu Apr 28 01:30:07 EDT 2005 | Marv
The Tray wagon on a Mydata can be any table width you desire, a one bay holds two trays, a two bay holds five, and a three bay holds seven. The tray wagon can be removed in about a minute flat. the TEX actually only requires two slot positions to h
Electronics Forum | Mon Jul 16 12:09:25 EDT 2012 | mikesewell
Our MY12 is having trouble picking both out of feeders and the TEX using the MIDAS head. The nozzle (spring or rigid) will go down and touch the part but won't pick it up. I get a Level too high error - the pick location isn't obstructed, part isn't
Electronics Forum | Fri Apr 15 08:23:14 EDT 2005 | cyber_wolf
We are seeing more and more jobs come in with matrix tray parts for our mydata machines. The problem is that the largest Y wagon will only hold 3 or less trays. We have some jobs that have 10+ trays. Currently our operators cut the trays down to sma
Electronics Forum | Tue Apr 09 21:57:42 EDT 2019 | alexvolovich
If you were able to do a first/last part, then your tray wagon is set-up. You need to go to Tray Types and program the tray that will match the piece of tape you have. Then you should be able to add your component to the tray wagon.
Electronics Forum | Tue Jun 24 14:00:58 EDT 2014 | joekirin
We built a tray that accepts tape. It is made out of a waffle tray and board breakaways. It works very well. We use magnets to mount it on our Y-Wagon teaching it as a tray.
Electronics Forum | Tue Apr 09 22:19:38 EDT 2019 | d_nguyen2018
Thank you, Alex!
Electronics Forum | Thu Apr 28 11:13:33 EDT 2005 | cyber_wolf
We currently have Fuji's(IP3's included) and Mydata's in our SMT area , so training is not an issue. The reason I was thinking of an IP3 is because they seem to be available for 50K or so. We cannot afford to loose any mag positions on our Mydata's t
