Electronics Forum | Thu Sep 21 12:03:35 EDT 2000 | Boca
We have been using a hot air knife on Electrovert equipment for a few years. It must be set up properly for a given machine, primarily the distance from the trailing edge of the wave. Sometimes the set up must be adjusted for the assembly being sol
Electronics Forum | Mon Feb 19 11:14:49 EST 2007 | realchunks
WaveRiders do work well. But they just measure, do they do not adjust anything. It's up to you or your staff to interpret and adjust your machine accordingly. It�s one of those tools that is affective, but only to the extent of you�re willing to u
Electronics Forum | Thu Sep 24 17:00:03 EDT 2009 | dogsbody
would any body be able to supply me with infomation on how to adjust a quadalign unit,as a unit on my line will not pick up 0603 resistors,but will pick up thicker 0603 caps. My manuals offer no help.I have run the aligner calibration with the cone t
Electronics Forum | Wed Nov 28 21:37:53 EST 2018 | lukejk95
Hello, so basically I've been having trouble with parts popping up as they are being inserted into the PCB. It happens at random and I've gone through multiple rebuilds and tons of adjustments and still cant get a clean run. I've tried raising the cu
Electronics Forum | Tue May 19 02:25:56 EDT 2015 | alexeis
Hi, From experience of our customers, I can sum that Factory Logix NPI is so convenient and difficult to implement. Also, it is not optimized for each plant and have a lot of bugs. Therefore, I do not really recommend it. In addition, we got to mee
Electronics Forum | Sun Sep 05 14:34:37 EDT 1999 | JohnG
We are using some Fuji machines and have trouble picking parts up from damaged or mis-adjusted feeders. When I was working with Panasonic machines I was able to buy a feeder alignment jig from them to align the pick spot in the feeder, but Fuji doesn
Electronics Forum | Wed Sep 08 19:23:37 EDT 1999 | Steve E
| We are using some Fuji machines and have trouble picking parts up from damaged or mis-adjusted feeders. When I was working with Panasonic machines I was able to buy a feeder alignment jig from them to align the pick spot in the feeder, but Fuji doe
Electronics Forum | Wed Feb 03 15:42:31 EST 2016 | tombstonesmt
The way I view SPI is that is simply a tool. A tool to gather data to improve printing and prevent failures down the line due to screen printer anomalies. They can all inspect paste as necessary, work in closed loop with screen printer and provide a
Electronics Forum | Tue Sep 26 09:57:19 EDT 2006 | daxman
Thanks Chris... I do not have the c-tool, but I did make some adjustments to the middle cube when I was calibrating it. Like I said in an earlier post, I cleared the vision offsets in the ap.cal file and adjusted the middle cube until the board alig
Electronics Forum | Fri May 22 20:50:55 EDT 2015 | jlawson
Siemens FX may have some good parts in MES part but front end and NPI tools are much more limited to what Valor MSS offers... As total package end to end Valor MSS can provide full scope. Siemens has not put much R&D and enhancements in front end 'U