Electronics Forum | Wed Nov 20 15:25:26 EST 2019 | richardcargill
In our machinery, the pcmcia cards are simply Compact Flash cards in an adapter - not sure if this is always the case though
Electronics Forum | Wed Nov 20 15:20:07 EST 2019 | compit
I formatted with the FORMAT / s command or moved the system with the SYS command - system files are visible. Partition created and active. I ordered the PCMCIA adapter (PCI) only today - USB adapters do not support all cards.
Electronics Forum | Wed Nov 20 11:54:43 EST 2019 | compit
I'm trying to make a spare disk for an SMT machine. I format the new PCMCIA card with the system (using the machine's DOS, 6.20) but when the computer starts it writes that I don't have a system. How I make a floppy disk in this way - it starts from
Electronics Forum | Wed Nov 20 15:03:27 EST 2019 | richardcargill
If you've formatted the pcmcia / CF card then it'll be blank and have no DOS or anything as it acts as the hard drive for the machine. A DOS diskette formatted with /S will boot from the floppy drive, then allowing software installation with the orig
Electronics Forum | Wed Jan 14 22:19:18 EST 2004 | Dean
It's called VIOS. It can be run on a PC. But, it must be massaged considerabley as there is no I/O, servo or master cards in communication. Consult Assemblion for details. Remember, altering their software without express permission could put you i
Electronics Forum | Wed Jun 18 02:43:37 EDT 2014 | tjbooc
CHECK IO BOARDS STATUS, CHECK HEAD IO 24VDC SUPPLY, CHECK 24VDC SUPPLY TERMINAL, CHECK WIRING CONNECTED TO HEAD IO I think this is an I/O communication problem. Fail in connecting to I/O cards.
Electronics Forum | Fri Nov 18 02:42:46 EST 2005 | vinitverma
Greg, I recently faced this problem at a customer though the machine was Topaz X but the problem was same. So I suggest you first check if the GOOD LED is ON on the Servo card down in the MCX box. Also check the same GOOD LED on the System board in
| 1 |
winsouce.jpg)
.gif)