GPD Global | https://www.gpd-global.com/co_website/pdf/dispense/Contact-Surface-Sensor.pdf
. • Cycle time for a surface sense is approximately one (1) second. The cycle time is the same for all substrates. • Design incorporates a linear slide for smooth sensor tip extension
GPD Global | https://www.gpd-global.com/pdf/dispense/Contact-Surface-Sensor.pdf
. • Cycle time for a surface sense is approximately one (1) second. The cycle time is the same for all substrates. • Design incorporates a linear slide for smooth sensor tip extension
KD Electronics Ltd. | http://www.kundasmt.com/?DEK/6013.html
)System Alignment Capability: +/- 20μm @ 2.0 Cmk, (±6 Sigma)Wet Print Capability: ±25 µm @ 2.0 Cpk, (±6 Sigma) - Certified by external system for every printer before delivery by standardCore Cycle Time (CCT): 8
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/polymer-processing-systems/information/xaloy-screw-recovery
. Recovery time that is 1-2 seconds less than the set cooling time is a common "rule of thumb." If recovery time exceeds the set cooling time, the overall machine cycle time will increase
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/blog/081017-jet-dispensing-uv-cure-adhesive-to-seal-automotive-sensors
: Fluid Used UV-cure adhesive Application Requirements Shorter dispense cycle time Accurate, consistent deposits 0.8″ long beads 2.8 mg (+/- 0.2 mg) deposit volume Previous Process The manufacturer is using 30cc syringe barrels mounted within an enclosed automated dispensing system to dispense UV-cure adhesive to seal automotive sensors
KD Electronics Ltd. | http://www.kundasmt.com/?DEK/6014.html
KOHYOUNG NUTEK OTHER PARTS CONTACT US welcome to KD Electronic DEK Product number:DEK TQ printing platform Description: DEK TQ is superfast (core cycle time: only 5 to 6.5 seconds), highly precise (±17.0 microns @ 2 Cmk
1st Place Machinery Inc. | http://www.firstplacemachinery.com/firstplace_asm_MS899.html
: MS899-DL Year 2008 August Cycle Time: 175 ms XY Placement: +/- 1.5 mil Die Rotation: +/- 3 degrees Collect type: Surface pick type Pick/Bond Force: 40 - 250 g (adjustable
| http://www.szhonreal.com/productview.asp?id=107
. Technical parameters Function This equipment is used for loadign pcb . Maximum PCB capacity 50 pcs PCB thickness Min0.6mm Cycle time Approx 6seconds Transport direction Left to right/right to left(optional
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/asymtek/about-us/news/nordson-asymtek-introduces-continuous-path-motion-control-software
. When cycle time test data of 20 strips with 70 die on a strip was evaluated using Continuous Path Motion Control as compared to conventional underfill methods that use backtracking, there was about a 27
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/yestech/about-nordson-yestech/articles/combining-2d-and-3d-aoi-the-most-effective-inspection
. A smaller FOV means that additional images must be captured during an inspection (compared to a system with a larger FOV) which will lead to an increase in cycle time
