Used SMT Equipment | Board Cleaners
Aqueous Tech Trident 111 Must sell posted 5/5/15 208V 3 phase 40 Amps Year 2008 Trident III is capable of removing all flux residues including rosin, no-clean and water soluble. Both lead and lead-free flux residues may be removed using the
Used SMT Equipment | In-Circuit Testers
Agilent 83496A-100-200-300 Clock Recovery Module The 83496A multi-rate electrical Clock Recovery (CR) module performs clock extraction for waveform analysis with continuous, unbanded tuning from 50 Mb/s to 13.5 Gb/s, ultra-low residual jitter a
Used SMT Equipment | In-Circuit Testers
Agilent-Keysight 83496A-100-200-300 Clock Recovery Module The 83496A multi-rate electrical Clock Recovery (CR) module performs clock extraction for waveform analysis with continuous, unbanded tuning from 50 Mb/s to 13.5 Gb/s, ultra-low residual
Used SMT Equipment | In-Circuit Testers
Agilent-Keysight 83496A-100-200-300 Clock Recovery Module The 83496A multi-rate electrical Clock Recovery (CR) module performs clock extraction for waveform analysis with continuous, unbanded tuning from 50 Mb/s to 13.5 Gb/s, ultra-low residual
Used SMT Equipment | Soldering - Reflow
BTU Pyramax 125N Parameters Pyramax Specifications Model Pyramax 125N Atmosphere Air or Nitrogen Conveyor Speed 10-60 in/min 25-152 cm/min Conveyor Width 2-18 in 51-457 mm Heated Length 125 in 3175 mm Heated Zones&
Used SMT Equipment | SMT Equipment
Features: 1. Heating system 1.1 Independent heating models are located with top and bottom with single hot air circulation in each zone. 1.2 All the heating zones are controlled by PLC through PLD, 1.3 Each zone is heated step by step, thus reducin
Used SMT Equipment | Soldering - Reflow
Configuration: ● edge/mesh ● Dual Air cooling zones ● left to right transfer ● chain oilers ● SMEMA VERSATILE, DURABLE, HIGH-PERFORMANCE REFLOW AT A VERY COMPETITIVE PRICE The Bravo 8105 is a forced convection reflow oven with eight top an
Used SMT Equipment | Soldering - Reflow
The SMRO-4000 Scirocco Reflow oven has been developed for reflow soldering of Hybrid boards, SMT boards and Curing Glue or thin film pastes. The machine is developed for medium to large series of assembly. The Scirocco is based on hot air convection.
Used SMT Equipment | Soldering - Reflow
The SMRO-4000 Scirocco Reflow oven has been developed for reflow soldering of Hybrid boards, SMT boards and Curing Glue or thin film pastes. The machine is developed for medium to large series of assembly. The Scirocco is based on hot air convection.
Used SMT Equipment | Soldering - Reflow
The SMRO-4000 Scirocco Reflow oven has been developed for reflow soldering of Hybrid boards, SMT boards and Curing Glue or thin film pastes. The machine is developed for medium to large series of assembly. The Scirocco is based on hot air convection.
winsouce.jpg)
.gif)