The DV-7000 Heli-Flow® pump is a third-generation encoded auger pump. The pump has a floating head for use with footed needles to make fast, repeatable dots of solder paste and silver epoxy. The dispense gap is mechanically controlled by the needle,
Specification: Material:Polyester or Polycarbonate Artwork Format:CorelDraw, Adobe Illustrator AI or EPS, AutoCAD Dwg or DXF Tactile Feel:Is determined by the thickness of the overlayer. Normally between 0.06” -0.08". Color Verification:Pantone M
Electronics Forum | Sat May 29 06:07:16 EDT 2021 | rsatmech
Thanks, I do observed more solder paste terms of percentage in 0.06mm stencil than in 0.08mm stencil.
Electronics Forum | Thu Aug 24 08:46:15 EDT 2006 | Chunks
I too had to reduce by 50% because of floating (0.006"). But, most recommendations are for pads with via perforations. So if you are mounting to a flat pad, reduce even more.
Used SMT Equipment | SMT Equipment
Product Name:Panasoinc high speed chip mounter CM402 Product number: CM402 Detailed product introduction High speed chip CM402 Panasonic Year: 2003-2010 PCB substrate size: 510*460 Feeder stations: 108 Equipment outline dimension: about: 267
Used SMT Equipment | SMT Equipment
Product Name:Panasoinc high speed chip mounter CM402 Product number: CM402 Detailed product introduction High speed chip CM402 Panasonic Year: 2003-2010 PCB substrate size: 510*460 Feeder stations: 108 Equipment outline dimension: about: 267
Industry News | 2003-03-24 09:38:49.0
Declared a regular quarterly dividend of $0.06 per share payable May 6, 2003 to stockholders of record at the close of business on April 8, 2003.
Industry News | 2018-10-18 10:40:04.0
Via Tent-Holes with Solder Mask
Parts & Supplies | Pick and Place/Feeders
Which series nozzles could be used for Phlips Topaz and Emerald machine As we know, many parts are compatible for Yamaha and Philips machines, but some models their nozzles are not generic.So which series nozzles could be used for Phlips Topaz and
Parts & Supplies | Pick and Place/Feeders
179148311 CABLE RT CABTIRE SENSOR 1-791-483-11 E1100 Other sony parts in stock: 1-417-512-11 CDU6-40D-M9NV FREE MOUNT CYLINDER 1-787-783-11 TS4862N4020E500 MOTOR 1-787-834-11 SGMAS-12ADA-SY12 MOTOR 1-787-834-12 SGMAS-12ADA-SY1 DRIVER 1-787-835
Technical Library | 2020-07-15 18:29:34.0
In the early 2000s the first fine-pitch ball grid array devices became popular with designers looking to pack as much horsepower into as small a space as possible. "Smaller is better" became the rule and with that the mechanical drilling world became severely impacted by available drill bit sizes, aspect ratios, and plating methodologies. First of all, the diameter of the drill needed to be in the 0.006" or smaller range due to the reduction of pad size and spacing pitch. Secondly, the aspect ratio (depth to diameter) became limited by drill flute length, positional accuracy, rigidity of the tools (to prevent breakage), and the throwing power of acid copper plating systems. And lastly, the plating needed to close up the hole as much as possible, which led to problems with voiding, incomplete fill, and gas/solution entrapment.
Description MODEL ID: CM402-L MODEL NUMBER: KXF-4Z4C PCB DIMENSIONS: L 50 mm x W 50mm to L 510 mm Ã? W 460 mm HEAD TYPE: Type A-2 (12/12 nozzles HIGH-SPEED) (OPTION) Number of nozzles: 12 nozzles/head Maximum speed: 0.052 s/chip (69,500
http://www.ddmnovastar.com/selective-solder/low-to-medium-volume/ess-selective-soldering-machines - The ESS Selective Soldering Machines from DDM Novastar offer a new entry point in cost-effective, easy-to-operate, automatic batch selective soldering
