Fully automatic Tape And Reel Package single-sided component cutting machine Model: SC-110 Voltage: AC 220V 60Hz/50Hz Size: L360*W210*H140MM Weight: 24kg Efficiency: 30000-60000PCS/H Product Description: 1. Suitable for cutting feet of single-sideb
Fully automatic Tape And Reel Package single-sided component cutting machine Model: SC-110 Voltage: AC 220V 60Hz/50Hz Size: L360*W210*H140MM Weight: 24kg Efficiency: 30000-60000PCS/H Product Description: 1. Suitable for cutting feet of single-sideb
Electronics Forum | Fri Jul 13 19:08:55 EDT 2001 | mparker
Home plate apertures are designed to reduce or eliminate solder balls that occur when placing a chip and reflow of the solder. This aperture type is usually desired when processing with a "no-clean" solder paste. The design of the aperture is usually
Electronics Forum | Fri Sep 21 10:56:38 EDT 2001 | davef
Not as such. Look at IPC-7525 �Stencil Design Guidelines� The issues are: area and aspect ratios. They relate the size of the aperture opening to the thickness of the stencil. Check the fine SMTnet Archives for guidelines.
.JPG)
Used SMT Equipment | SPI / Solder Paste Inspection
The LSM300 follows the successful Laser section Microscopes LSM and LSM2. This new non-contact laser based system is an off-Line solder paste inspection system.LSM300 provides automatic height measurements, eliminating the inconsistencies of manual m
Used SMT Equipment | AOI / Automated Optical Inspection
This AOI was purchased for $49,995 from Manncorp. The Sherlock AOI is in excellent condition and has under 200 hours of usage. The Sherlock AOI Systems detect a comprehensive range of defects and errors in PCB assembly using the Sherlock PCB ins
Industry News | 2019-10-15 15:04:38.0
A new technical paper that focuses on the application requirements of printing small apertures and the results of a design of experiment testing will be presented at the upcoming Productronica trade fair in Germany. The paper will be presented by Edward Nauss, MPM Applications Engineer at ITW EAE.
Industry News | 2016-08-03 20:48:00.0
The SMTA Capital Chapter is pleased to invite you to its upcoming Capital Expo and Tech Forum at Johns Hopkins University / Applied Physics Lab, Kossiakoff Center, 11100 Johns Hopkins Road,Laurel, MD 20723, on Tuesday, August 30th.
Parts & Supplies | SMT Equipment
NOZZLE NXT-H04-7.0G (AA07K00/AA07K04/AA07K05) Spare Name: AA07K00 AA07K04 AA07K05 NXT-H04-7.0G Specification: H04 Placing Head Nozzle Dia, 7.0 w / rubber pad NXT H04 7.0G nozzle FUJI NXT H01 PICK UP NOZZLE ¢ Applicable models: FUJI NXT H
Parts & Supplies | Pick and Place/Feeders
NXT nozzle NXT-H01-7.0G (AA07300/AA07310) Spare Name: AA07300 AA07310 NXT-H01-7.0G Specifications Model: NXT NOZZLE Head H01 Dia 7.0G. FUJI NXT H01 PICK UP NOZZLE ¢ Applicable models: FUJI NXT H01 AA0AS00 FUJI NXT H01 1.0 AA05800 F
Technical Library | 2020-04-14 15:56:32.0
This paper will focus on the application requirements of solder printing small aperture designs, concentrating on 008004 (inch) / 0201 (metric) size components, and the results of a design of experiment printing these challenging apertures. As Moore's law continues to be applied to component miniaturization, the next installment of reduced packaging has arrived in the form of the 008004/0201 for resistors and capacitors. Component size roughly the size of a grain of sand presents specific challenges to the solder printing process. To address these challenges, each aspect of the printing process will need be examined. This includes essential machine requirements, including correct squeegee blades, tooling support, and calibrations, to meet the demanding specifications. The correct match and design of materials will be addressed, focusing on the stencil and substrate design along with solder paste and cleaning solvent requirements. A design of experiment will be reviewed that applies the machine and materials discussed, including the printer and Solder Paste Inspection (SPI) setup and the specific machine parameters used. The results of these DOE's will then be closely examined.
Technical Library | 2015-08-25 13:51:27.0
The stencil printing process is one of the most critical processes in the electronic production. Due to the requirement: "faster and smaller" it is necessary to place components with different paste volume close together without regard to solder paste printing. In our days it is no longer possible to control the solder paste volume only by adjustment of the aperture dimensions. The requirements of solder paste volumes for specific components are realized by different thicknesses of metal sheets in one stencil with so called step stencils. The step-down stencil is required when it is desirable to print fine-pitch devices using a thinner stencil foil, but print other devices using a thicker stencil foil. The paper presents the innovative technology of step-up and step-down stencils in a laser cutting and laser welding process. The step-up/step-down stencil is a special development for the adjustment of solder paste quantity, fulfilling the needs of placement and soldering. This includes the laser cutting and laser welding process as well as the resulting stencil characteristics and the potential of the printing process.
This is video shows how to print a PCB using a prototype foil only stencil. The SMT prototype stencil (www.soldertools.net) is made from a high nickel content material able to offer repeatable high precision apertures. The steps of alignment, printin
LSMO-105 fastest and most reliable stencil inspection machine www.aoivision.com
Events Calendar | Mon Mar 18 00:00:00 EDT 2019 - Mon Mar 18 00:00:00 EDT 2019 | ,
Webinar: Stencil Design for Solder Paste, In Process Inspection & Process Defects
Career Center | , | Engineering,Production
Project Management, SMT Process Engineering
Career Center | Sparks, Nevada USA | Engineering,Management,Production
Felix Gutierrez Bueno 3906 Dominus Drive, Sparks. NV. 89436 Cel: 775-313-2975 felix.gutierrez23@yahoo.com *SMT Manager * Sr. SMT Process Engineer * Manufacturing Engineer * Maintenance and repair Supervisor * Background Broad Experience serving as:
GPD Global | https://www.gpd-global.com/pdf/doc/Dispense-System-Service-Guide-22290008G.pdf
. • Weight specification updated for DS Series. Improvements • Content removed for legacy models DS9000 and DS9100. • Legacy front panel controls removed from DS Series images
| http://www.thebranfordgroup.com/dnn3/Auctions/RecentAuctions.aspx
] SOLD - Auction Closed on 8/31/2022 Branson & Dukane Ultrasonic Welders! 2nd in a Series – Incredible Opportunity 2,500-Watt to 4,000-Watt Welders Available New in 2020 and Prepped for Shipping Tempe, AZ Aperture Solutions & Pues LLC [Online] SOLD
