Electronics Forum | Tue Nov 28 13:43:48 EST 2017 | emeto
I have half of that distance.
Electronics Forum | Wed Nov 29 08:55:35 EST 2017 | capse
I represent Fancort Industries. We provide "pizza cutter" and horizontal opposing blade "guillotine" style v-score depanel equipment. The edge clearance requirements are 0.030" - 0.050" for the wheel cutter and down to 0.020" for the opposing blade e
Electronics Forum | Tue Nov 28 13:23:34 EST 2017 | georgetruitt
For connectors, we maintain a 0.05" clearance from components edge to the center of the V-groove score
Electronics Forum | Tue Nov 28 11:58:58 EST 2017 | emeto
Hello all, I am about to design a panel and there are two connectors on the board that seem to be very close to the edge of the board. I am worried that they might interfere with the cutter blade. Can you tell me how close do you think a part should
Electronics Forum | Tue Jun 14 10:01:01 EDT 2011 | travishemen
.088" from the edge, running parallel to the V-score, 1812 package size. Kemet part number C1812C105K5RACTM. Thanks
Electronics Forum | Wed Jun 15 17:47:48 EDT 2011 | davef
Classic mechanical stress crack pattern. Pretty Try baking your boards for 2 hours at 100*C Minimum spacing between board features and v-score or break away is 30thou.
Electronics Forum | Tue Jun 14 09:26:01 EDT 2011 | kenneth0
what is the clearance between the chips and the edges?
Electronics Forum | Tue Jun 14 10:02:11 EDT 2011 | travishemen
Thats .088" from component edge to pcb edge.
Electronics Forum | Tue Jun 14 17:21:46 EDT 2011 | isd_jwendell
I use a pizza cutter with parts closer than that, but they are small-ish (
Electronics Forum | Mon Jun 13 13:35:08 EDT 2011 | travishemen
Hello, does anyone have any information on stress induced during V-score depaneling. We are using a machine with a fixed blade on the bottom and a free rotating blade on top driven by a motor. We have had some cracked capacitors on the edge of an a
