Electronics Forum | Mon Jul 16 12:09:25 EDT 2012 | mikesewell
Our MY12 is having trouble picking both out of feeders and the TEX using the MIDAS head. The nozzle (spring or rigid) will go down and touch the part but won't pick it up. I get a Level too high error - the pick location isn't obstructed, part isn't
Electronics Forum | Tue Oct 09 16:25:26 EDT 2001 | meowen
Unfortunately 95% of our runs require both sides of our Universal HSP's. We also have carts that hold one carriage worth of feeders on each side. Parts that carry over from one product to the next are flagged and relocated in the machine per the ne
Electronics Forum | Thu Dec 14 04:02:40 EST 2017 | spoiltforchoice
"I would expect that any intelligent feeder > enabled machine would pull the correct part no > matter where it is placed on the machine (not > forced by the program)" > > this is true, but you > have to tradeoff the setup time vs production > t
Electronics Forum | Wed Dec 13 22:22:04 EST 2017 | deanm
As mentioned above, Mycronic and Europlacer seem to be designed toward high mix so would consider them but would also like to consider a more traditional machine too. Right now I have around 220 feeder slots across two machines inline. Mycronic and E
Electronics Forum | Tue Mar 19 11:54:56 EDT 2024 | tommy_magyar
Hi there, I've been happy with the iiNeo and iiNeo+ from Europlacer, both have the capacity of 8*33 8mm feeders (264 slots in total). It can build boards up to 505*360 mm (our biggest PCBA, maybe it can do bigger one too). 6 and 12 monthly services
Electronics Forum | Fri Jun 12 01:17:52 EDT 1998 | Erhard
Are you using extra feeder tables that you can setup off line and than just exchange for the ones you had in the machines for the previous batch? This way the Siplace should not be too bad. Otherwise for fast change and low volume you might look at m
Electronics Forum | Sat Jun 13 09:36:46 EDT 1998 | RNLM
| Is cost an issue? I evaluated Siemens Siplace about a year ago and the price per placement was twice what Phillips Machinery has to offer. We too are a high mix/low PCb count shop. Also, Siemens has many hidden costs and the references I talked
Electronics Forum | Mon Apr 08 15:39:10 EDT 2024 | mistrthou
The error is: MOT-Command/205: Motor speed out of control Motor speed deviates from expected speed. – Problem with power supply, motor current too low. – Mechanical problem, friction too high or tool stuck in Z. I'd be looking at excessive friction
Electronics Forum | Wed Mar 21 11:08:58 EDT 2018 | spoiltforchoice
Get them to > quote individual feeder and nozzle prices too so > you know what you are committed to going forward. Amen to that, I took the phrase very affordable wrt essemtec nozzles and bits at face value until I came to want some more, and OMG
Electronics Forum | Wed Jul 02 16:58:40 EDT 2008 | jmelson
If these are similar to the earlier CSM feeders, there are several things to check. The cover plate that holds the tape on the sprocket can be adjusted slightly by eccentrics to accomodate thicker tapes. It the cover is too tight, there will be bin
