Electronics Forum | Fri Mar 19 13:18:03 EDT 2010 | deanm
Regarding your question about buying equipment to vacuum seal the MBBs, according to the IPC/JEDEC standard, "Full air evacuation is not needed or recommended; light air evacuation will reduce the packaging bulk and enhance carton packing. Excessive
Electronics Forum | Wed Mar 24 12:46:42 EDT 2010 | szypko
aj, how are the LED's packaged? Radial tape or tube?
Electronics Forum | Tue Feb 24 10:58:51 EST 2004 | damands
We want to insert 4 legged LEDs (superflux LEDs)in the PCB. Please advise what kind of automation equipment can we use?
Electronics Forum | Fri Feb 27 09:52:49 EST 2004 | pjc
http://www.pmjautomec.com/index.cfm?cd=21133⊂=21207&doc=21397
Electronics Forum | Fri Feb 27 17:37:07 EST 2004 | JT
We use a JUKI 760 and a 106 nozzle.
Electronics Forum | Tue Feb 24 12:45:30 EST 2004 | esoderberg
Contact Kittner equipment supply Ph#607.757.9711 and talk to Walt or Dick. They have modified a unimod in the past to insert the four legged leds.
Electronics Forum | Wed Mar 24 07:10:32 EDT 2010 | aj
Hi all, I would like some recommendations on what machines are best suited to Automated Insertion of plated through hole LEDs. I am sure there are plenty of pitfalls associated with this type of process aswell, so if you could share these aswell.
Electronics Forum | Tue Nov 11 04:48:48 EST 2003 | Dmitry
What kind of equipment is used to insert LEDs into PCB? LEDs are in tape form. Thank you for your help!
Electronics Forum | Fri Feb 27 06:22:13 EST 2004 | Vishwanath Kancherla
Hi Daman, Are you the same guy working for Altos India ? How are you and where are you working .my e-mail id is vishwanathkancherla@hotmail.com
Electronics Forum | Wed May 06 23:46:31 EDT 1998 | Thomas Nisbet
We want to insert LED's on .100 center's with a UIC Rad 2. The LED must have plastic standoff on the leads before they are inserted. Are there any tape & reel machines that will put the standoff on the LED and then put the component on tape & Reel. A
