Industry Directory | Manufacturer
Almit is one of the leading providers of solder wires, solder pastes and of course lead-free solders, which are also successfully applied in the aerospace industry, in the automotive field but also in consumer electronics.
New Equipment | Solder Materials
Common Flux Thinner is a solvent that is used to thin Water Soluble, No Clean and RMA fluxes in foaming and some spray applications. Use of Common Flux Thinner is suggested when the flux acid number is too high due to solvent evaporation or residues
Tamura's Solder Paste RMA Series is a solder paste, which consists of RMA type flux satifies QQ-S-571E and spherical solder powder with very little oxide. So flux residue after soldering becomes high reliable coating with excellent insulation resist
Electronics Forum | Mon Mar 25 21:45:22 EDT 2024 | buckeye
I got an inquiry from one of our electronics labs with regards to their soldering processes. They use eutectic (63% Sn, 37% Pb) solder. For liquid flux they are currently using Kester 186, which is an old-school, full rosin (RMA and ROL1) flux that c
Electronics Forum | Thu Apr 05 02:54:34 EDT 2001 | GregH
Hi, We are planning to use RMA flux based Solder Paste for our line. We are currently using a No-Clean Solder Paste. Can I use an aqueous cleaner to clean my board with the above paste ? How will I clean the board ? What are the advantages and disad
Industry News | 2017-10-05 05:56:21.0
The SMTA Capital Chapter is pleased to announce its third meeting of 2017 on November 7th, scheduled from 5:30 pm to 8:00 pm at ZESTRON Americas, 11285 Assett Loop, Manassas, VA, 20109. Ravi Parthasarathy, Senior Application Engineer, ZESTRON Americas, will present “Cleaning Before Conformal Coating” and “pH Neutral Cleaning Agents - Market Expectation and Field Performance”.
Industry News | 2014-07-09 10:22:05.0
Indium Corporation recently released RMA-155 Pb-Free Solder Paste. RMA-155 is the best solder paste for customers who are required to use RMA materials, but who need the performance benefits of modern Pb-free solder paste technology.
Technical Library | 2017-08-17 12:28:30.0
At SMT assembly, flux outgassing/drying is difficult for devices with poor venting channel, and resulted in insufficiently dried/burnt-off flux residue for no-clean process. Examples including: Large low stand-off components such as QFN, LGA Components covered under electromagnetic shield which has either no or few venting holes Components assembled within cavity of board Any other devices with small open space around solder joints
Technical Library | 2014-03-27 14:50:01.0
Because of the phase out of CFC's and HCFC's, standard solder pastes and fluxes evolved from RA and RMA fluxes, to No-Clean, to low residue No-Clean, to very low residue No-Clean. Many companies came out with their cleaning solutions, aqueous and semi-aqueous, with each product release being more innovative than the previous one. Unfortunately for most of the suppliers of cleaners, two other trends appeared; lead-free soldering and the progressive miniaturization of electronic devices.
Unsurpassed cleaning, high-efficiency drying, low cost of ownership, ease of maintenance, and minimum downtime all come together in the ELECTROVERT Aquastorm, a world-class printed circuit board cleaning system. As high-reliability PCBs become minia
Career Center | Riyadh 11623, Philippines | Engineering,Maintenance,Production
PROFESSIONAL EXPERIENCE: Connected in the field of manufacturing/electronics industry experienced in the line, Through Hole and Surface Mount Technology, worked on various Fuji Machines Universal model, such as: CP 643E chip shooter QP 242E chip mou
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/products/solder-paste/fluxplus-paste-flux
. Residue is easily removed with 60° C (140° F) water at 40 psi (3 bar) pressure. Rosin Mildly Activated (RMA) Consisting of rosin, solvent, and a small amount of activator, most RMA flux is fairly low in activity and best suited to easily soldered surfaces
| https://pcbasupplies.com/desoldering-braid-lead-free-050-x-10-antistatic-25-pack/
using RMA type no-clean fluxes Uses flux classification type L0 per IPC J-STD-004B - compatible with R, RA, RMA, and NC type fluxes Datasheet for EasyBraid One Step Lead Free Desoldering Braid There
.gif)
