Industry Directory | Manufacturer
Mingke is a manufacturer and supplier of nurse call system, hospital intercom, medical pager, nurse call button, wireless ward pager and wired intercom in china.
SMT Samsung CP feeder 32mm non-stop type NF for pick and place machine Samsung SM/CP40 CP45 Feeders models: SAMSUNG SM 8*2mm FEEDER SAMSUNG SM 8*4mm FEEDER SAMSUNG SM 12mm FEEDER SAMSUNG SM 16mm FEEDER SAMSUNG SM 24mm FEEDER SAMSUNG SM 32mm FEEDER S
A500, A600, A800 - 5, 6 or 8 top/bottom cooling zones. Heating System: Up to eight groups of top and bottom forced hot air convection heating zones. Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air co
Electronics Forum | Mon Aug 31 11:52:28 EDT 2020 | inspiredmorris20
Hello Jon, I appreciate your reply, correct there are 2 red (24v) that control the main power and 2 blue (they control the power to the units operation keys ready, start, stop, reset, change feeders.) additionally there is a red jumper wire on the E
Electronics Forum | Fri Aug 28 17:47:59 EDT 2020 | inspiredmorris20
thanks Stephen!! I'm testing for voltage and have found 24v going through the E-stop to the main switch. If i trip the E-stop i can disengage the main switch. I have no more control to the hardware then that. The software is not throwing any code ot
Used SMT Equipment | Pick and Place/Feeders
Refurbished YAMAHA YV100XG SMT Pick and Place Machine Machine Type YV100XG Substrate size M type L460 * W335 (MAX) -L50 * W50 (MIN) L type L460 * W440 (MAX) -L50 * W50 (MIN) Mounting accuracy Absolute accuracy (μ + 3σ): ± 0
.JPG)
Used SMT Equipment | Chipshooters / Chip Mounters
BTW, we have sepcialzied in SMT field over 12 years and support one-stop SMT solution for our customers. Including SMT equipment and spare parts, such as Loader and Unloader, Reflow oven, Nozzle, feeder, motor, PCB board ect. We can also customize
Industry News | 2017-10-02 13:58:42.0
GPD Global will exhibit at the upcoming IMAPS 2017. At booth 244, GPD Global will exhibit a complete line of Fluid Dispensing pumps with the latest dispense technologies for integration or retrofit. Whether your process requires low or high viscosity fluids, thick pastes, or abrasive media, there is a dispense pump to meet your requirements.
Industry News | 2019-01-09 21:58:38.0
GPD Global will exhibit at IPC APEX EXPO 2019. Stop by Booth 2915 to see live demonstrations of machines and equipment. Experts will be there to discuss your production needs. Whether your project requires a pump for retrofitting or a fully automated dispense system, conformal coating, or component preparation, we have a solution for you.
.jpg)
Parts & Supplies | Screen Printers
Name :1003308-1MPM down motor scraper Part Number :1003308-1 Description :1003308-1 MPM upper and lower motor scraper, SQUEEGE UP / DOWN MOTOR Applicable models: UP; AP Printing Presses 1003308-1 MPM upper and lower motor scraper, SQUEEGE U
Parts & Supplies | SMT Equipment
Upper and lower motor scraper(1003308-1) Name :1003308-1MPM down motor scraper Part Number :1003308-1 Description :1003308-1 MPM upper and lower motor scraper, SQUEEGE UP / DOWN MOTOR Applicable models: UP; AP Printing Presses 1003308-1 MPM u
Technical Library | 2019-12-12 02:43:44.0
Today we discuss the reason that causes temperature humidity chamber to alarm,In most cases, the equipment alarm is caused by the improper operation in the process of use, which mainly includes following reasons:that are refrigeration system, temperature system and circulating system. First, Refrigeration system 1, refrigeration compressor overpressure alarm. If the refrigerant pressure exceeds the set value, it will stop and alarm at the same time. At this time, the fault must be eliminated and then manually reset. 2, short phase power supply, phase sequence alarm. When the external power supply of the equipment is out of phase or the phase sequence is changed, it will stop and alarm at the same time. 3. The circulating cooling water is short of water to alarm. When the water pressure of the cooling circulating water system is insufficient, it will stop and alarm at the same time, and it must wait for the fault to be eliminated and reset at the same time before it could run normally. 4, refrigeration compressor overheating alarm. When the coil of the compressor is overheated and the power supply of the line is not normal, it will stop and alarm at the same time. Second, Temperature system 1, the overtemperature alarm in the chamber. The sensors in the channel and the sample area are equipped with overtemperature protection devices, and there are also overtemperature protecter on the control panel. When the temperature in the working chamber exceeds the setting value on the controller, it will stop and alarm. 2. sample overtemperature protection. When the temperature in the sample area exceeds the protection temperature set by the controller, it will stop and alarm at the same time. The overtemperature protection of the sample is divided into upper limit protection and lower limit protection, which can be set according to the demand, Third,Circulating system 1. The alarm is caused by the overheating of the circulating fan. When the coil of the fan is over-heated, the alarm will be stopped at the same time. 2. The fan over-current alarm. When the current of the fan exceeds the allowable value, the alarm is stopped at the same time, and the normal operation can only be carried out after the fault maintenance of the overcurrent is completed. This is what we talk about today,if you have more questions,let us know.
Technical Library | 2016-04-14 13:49:44.0
A system level test, usually built-in test (BIT), determines that one or more subsystems are faulty. These subsystems sent to the depot or factory repair facility, called units under test (UUTs) often pass that test, an event we call No-Fault-Found (NFF). With more-and more electronics monitored by BIT, it is more likely that an intermittent glitch will trigger a call for a maintenance action resulting in NFF. NFFs are often confused with false alarm (FA), cannot duplicate (CNDs)or retest OK (RTOK) events. NFFs at the depot are caused by FAs, CNDs, RTOKs as well as a number of other complications. Attempting to repair NFF scan waste precious resources, compromise confidence in the product, create customer dissatisfaction, and the repair quality remains a mystery. The problem is compounded by previous work showing that most failure indications calling for repair action at the system level are invalid. NFFs can be caused by real failures or may be a result of system level false alarms. Understanding the cause of the problem may help us distinguish between units under test (UUTs) that we can repair and those that we cannot. In calculating the true cost of repair we must account for wasted effort in attempting to repair unrepairable UUTs.This paper will shed some light on this trade-off. Finally, we will explore approaches for dealing with the NFF issue in a cost effective manner.
Link: https://www.ascen.ltd/Products/mask_making_machine/ disposable medical face mask manufacturing machine also known as face mask production line,dusk mask machine,disposable face mask making machine.It is automatic output,a face mask body machine
Link: https://www.ascen.ltd/Products/mask_making_machine/ This kind of medical face mask manufacturing machine non woven dust mask machine is the auto equipment which be used to the product of disposable face masks, be suitable for the material of no
Training Courses | | | PCB Design Courses
The PCB design courses teach students the process, techniques and tools needed to design layout of printed circuit boards.
Training Courses | | | PCB Design Courses
The PCB design courses teach students the process, techniques and tools needed to design layout of printed circuit boards.
Events Calendar | Tue Jul 11 00:00:00 EDT 2023 - Tue Jul 11 00:00:00 EDT 2023 | Oshkosh, Wisconsin USA
Wisconsin Chapter In-Person Event: PCB Workshop and PCB Plant Tour
Events Calendar | Wed Sep 11 00:00:00 EDT 2024 - Wed Sep 11 00:00:00 EDT 2024 | Oshkosh, Wisconsin USA
Wisconsin Chapter In-Person Event: PCB Workshop and PCB Plant Tour
Career Center | 10th of ramadan, Egypt | Engineering,Maintenance,Management,Production
• Excellent Analytical, inter-personal and communication skills • Ability to work effectively in teamwork • Ability to set and achieve goals and work under pressure • Learn quickly, hard worker • Capable of study and research acti
Qinyi Electronics Co.,Ltd | https://www.qy-smt.com/shop/20272001-stop-143147?page=223&category=1111&order=name+asc
UNIVERSAL STOP 20272001 | QYSMT × Home About US ABOUT US FAQ SMT spare parts SMT Surplus equipments SMT peripheral equipments News Contact US 0 0 Sign in Contact Us Products AI SPARE PARTS STOP Public Pricelist Public Pricelist STOP
KingFei SMT Tech | https://www.smtspare-parts.com/sale-11375616-sm8-mm-smt-feeder-parts-stop-pawl-j7065953a-stop-pawl-for-samsung.html
SM8 MM SMT Feeder Parts Stop Pawl J7065953A STOP-PAWL For Samsung Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
