Electronics Forum | Tue Jun 26 15:27:14 EDT 2018 | Dex
Why would we change? our fuji equipment was previously owned by Motorola and have many hours on them. we struggle to place 0402 components and the vision system on the CP seems to be one foot in the grave. The machines are tired and have been ran har
Electronics Forum | Tue Mar 05 15:42:44 EST 2019 | emeto
Rob, you can always create a program and inspect the paste with your Checkplot. If you want to take it further though, you will need a centroid file. With centroid file you can lock pads to belong to a reference designator. When you do so you will n
Electronics Forum | Sat Mar 09 01:27:23 EST 2019 | buckcho
Hi, Rob. I have used Parmi and Koh Young SPI. Both have epmSPI software in which you load stencil gerber, load cad data(if you want) connect the pads to the designators, point fiducials and done. Can take from 10-15 up to 30 minutes, depending on how
Electronics Forum | Wed Feb 13 14:15:06 EST 2019 | slthomas
I don't see any attachments.....? Are the fiducials consistently well finished (perfectly round, shiny without splotches or other imperfections), or do they vary in quality? When you do a fid offset, is the correction consistent or do you get varie
Electronics Forum | Tue Sep 10 11:00:27 EDT 2019 | slthomas
Sometimes it's just because they want "data art" on the walls. I was once tasked with developing an SPC program for our SMT lines. It was crudely implemented (plotting points on a chart template) because this was a BIFF (big improvements for free) p
Electronics Forum | Fri Oct 11 03:06:00 EDT 2019 | bukas
Hello Dekhead, it is a constant offset, like 0.5 mm to right when machine prints away from operator. When print goes towards the operator there is no offset. I swapped X5 and X6 cards with spares I got but still same result . I set the program to hav
Electronics Forum | Thu Jan 23 14:51:33 EST 2020 | jede
I am trying to write a program to pull the feeder location from juki smt files and I am having trouble locating which file this information is located in. Basically what I am trying to accomplish with this program is to automate the set up process w
Electronics Forum | Sun Jun 21 02:43:27 EDT 2020 | jmelson
I'm planning to upgrade my P&P. We had a local auction that included a Samsung CP45FV. I was able to download a NEO manual, it was very well written and the Samsung software looks just incredible for setup and programming the vision system. But, t
Electronics Forum | Thu Dec 24 12:43:18 EST 2020 | marcelorotofrance
Hi Bob. When I initialize the system, all functions appears. In "Utilities/Initialize System Comm" option too. I have to confirm yet, but this problem appears to not happen in all programs. The red error message shows when I launch the program. My su
Electronics Forum | Thu Aug 04 18:17:21 EDT 2022 | unisoft
>>>> The Unisoft ProntoPLACE software ( https://www.unisoft-cim.com/pcbplace.php ) creates programs from CAD or Gerber or XY rotation and BOM files for setup of SMT Pick & Place, thru-hole, manusert & dispensing machines, and includes the basic feat
