Electronics Forum | Mon Jan 29 11:02:29 EST 2007 | jaimebc
You may be creating more problems by teaching feeders. We use one type of 8mm for whatever amount of feeders we have loaded. You shouldn't have to teach 10-8mm feeders with 10 different feeder names. Use only one.
Electronics Forum | Tue Mar 20 14:33:41 EDT 2007 | MEERAZ
JUKI 2000 MACHINES CAN PICK UP SIMULTANEOUSLY ONLY WITH 8MM FEEDERS (4 HEADS AT ONCE) 12 AND 16 CAN BE PICKED UP BY TWO HEADS (OR 3 HEADS KE-2060), HEAD SPACING ARE THE SAME AS 8MM FEEDERS
Electronics Forum | Mon Jan 10 14:36:11 EST 2011 | cyber_wolf
What else is there aside from 8mm embossed and paper ? I thought all 8mm tape is either paper or embossed.....
Electronics Forum | Fri Sep 20 13:26:00 EDT 2013 | mdang
Hi Sr.Tech, I already order the jig from used equipment dealer. I have a thin 8 mm wrench and 8 mm allen wrench. How do I remove the clutch from the ring gear? Thanks, -Michael
Electronics Forum | Fri Jun 05 08:38:22 EDT 1998 | Eric Klaver
The Tesa company delivers Splice Tape for 8mm, 12mm and 16mm. Also special splice tape for 8mm paper tape and some splice tools as well. Siemens uses for large tape a 'staple' but might be patented and then cannot be used outside Siemens. (Staples
Electronics Forum | Tue May 01 13:52:51 EDT 2007 | jasont
plz advise if the below feeders are compatible on CSM 46/60 (are they downwards compatible?); 1. Philips series FV-84-xxxxxC, model PA2903/70 (2,4 pitch, 8mm) QTY=29 2. Philips series FV-82-7-xxxxD, model PA2903/73 0603-type (2,4 pitch, 8mm
Electronics Forum | Tue Nov 25 13:29:58 EST 2003 | gregp
http://global.ihs.com/ ...is the distributor for EIA standards. It'll cost you about 50 bucks. The standard is EIA-481-B and covers 8mm-200mm embossed tape and 8mm and 12mm punched tape. I tried searching for this standard on this site but the se
Electronics Forum | Thu Aug 27 13:56:27 EDT 1998 | Stefan Witte
| Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together? Siemens has a pretty good splice tool, which crimps a small brass strip into the tape. The cover tape has to be sticked together with a small strip o
Electronics Forum | Mon May 27 15:12:43 EDT 2002 | grantb
Hi Yes we run into this fairly often, but rarely with 8mm, mostly 12 and 16mm and the tape usually splits rather than completely breaking.I would also be interested in hearing about others problems and if there is a specification dealing with this so
Electronics Forum | Wed Jul 07 16:18:00 EDT 1999 | Thomas Nocpen
| We got plenty of 16mmX12mm GSM1 Tape feeders that are not in use and we are short of 16mmX8mm Tape feeders. | Is there a way to convert these 16mmX12mm into 16mmX8mm ? | | Thanks and Regards, | | I had the same issue and traded them in towards t