Electronics Forum | Thu Mar 04 23:01:11 EST 2021 | tomek_k
P2604 BELT,CONVEYOR,.25" X105.25"L Regards Tomek
Electronics Forum | Wed Dec 17 10:25:47 EST 2003 | blnorman
I may have asked this question before but couldn't find anything when I ran a search. Question, after ultrasonically cleaning our boards we bake them out to drive off residual moisture. Current requirement is 24 hours @ 105�C. I seem to remember a
Electronics Forum | Thu Sep 18 12:11:45 EDT 2008 | jwentz
Does anyone have experience with using Pb-free SAC105? We are looking at the pro's/con's compared to a SAC305 process for a SMT operation. I have read it has a higher melting temperature. Specifically, we are concerned about a product we are developi
Electronics Forum | Thu Sep 25 16:30:44 EDT 2008 | aj
Hi, I would be interested to hear the outcome of your trials! Although, if mechanical stress is of concern, I would look at what is causing the stress and tackle that. I would suspect that any stress great enough to fracture sAC305 joint would do t
Electronics Forum | Thu Sep 04 21:50:47 EDT 2003 | davef
We like to use "enameled wire" that can be stripped by hot solder. Formvar [105�C] will not do that. Formvar was designed to with stand the hot oil seen in transformers. So, it requires either chemical or mechanical stripping. Most polyurethanes
Electronics Forum | Fri Nov 24 10:03:08 EST 2006 | slthomas
"The fluid sometimes heats up to 105 deg F." Not sure what you mean here...is it set at 105 but rarely gets there, or is your temperature dependant upon another process to heat it up? Also, what temp is your rinse water? We used to use a U/S clean
Electronics Forum | Tue Jul 11 16:12:24 EDT 2000 | dstamour
Dave, They are monolithic amplifiers and similiar things. case styles VV105, AF320, AF190, BBB and GD-24. We have a customer who wants all these trimmed before placing on the board.
Electronics Forum | Thu Dec 13 16:18:29 EST 2001 | smtspecialist
I have a 10k thermistor to solder to a board, the problem is that the thermistor can't absorbe more then 105 degree C and as soon as I send it through the reflow oven or hand solder it, the part internaly over heat giving inconsistent readings. Any
Electronics Forum | Mon Aug 04 13:54:01 EDT 2003 | A
Conformal Coating Equipment Vendors for selective conformal coating of PCBAs: http://www.asymtek.com/products/sc_105_205.htm http://www.pva.net/ http://www.ultraspray.com/spraycoating/index.htm
Electronics Forum | Thu Aug 31 02:52:12 EDT 2006 | AJACK
WE ARE RUNNING A VERY HIGH MIX OF PRODUCT. WE ARE RUNNING THE AUGUST NSX-105 AND THE CAMTEK FALCON. I HIGHLY RECOMMEND THE CAMTEK FALCON.
