Electronics Forum | Wed Aug 23 09:27:41 EDT 2017 | dleeper
As Evtimov mentioned, it will be dependent on package. It will also be dependent on the specifics of your machines so there is no universal "good" value. You will need to experiment to find the best values for your equipment and components. I would
Electronics Forum | Tue Dec 10 13:07:45 EST 2002 | cyber_wolf
Sorry for the delay. Loctite 3616 in a screen printing process. Thanks
Electronics Forum | Fri Mar 23 15:35:20 EDT 2012 | cyber_wolf
This is done by adjusting the amplifier if I remember correctly. I think there is a delay pot. There is no adjustment in Flexa.
Electronics Forum | Mon Mar 19 23:35:10 EDT 2007 | bvdb
Hi Pete, I was using only the small and medium nozzles but it happens on both nozzles. No error message unless the delay went past about 5 seconds then a Q servo error and machine stops. Pressing reset and run enables it to continue although it th
Electronics Forum | Tue Jul 24 17:15:13 EDT 2007 | blnorman
Unless you've got an extremely agressive cleaner, the epoxy should hold the parts during the delay time. That's their job basically. We ran reflow first pass, glue parts, then wave solder second pass. There were potential delays between adhesive b
Electronics Forum | Wed Aug 03 13:04:04 EDT 2022 | proceng1
My initial thought is that the part is slightly delayed in releasing. When you are running one head, it doesn't matter. But when running multiple heads, the machine starts to move to the next placement before the part has fully released from the noz
Electronics Forum | Wed Jul 14 10:46:58 EDT 1999 | John Thorup
it's just so slow. yesterday afternoon and this morning i have had to leave the site because the delays, timeouts and other errors. what's up?
Electronics Forum | Wed Aug 08 15:43:48 EDT 2001 | Claude Couture
Low tech suggestion: turn monitors off manually after use. High tech suggestion: install a "presence" sensor, like those on some photocopier, that turns on the monitor when someone is near it, then a time delay for shutting it off.
Electronics Forum | Mon Jul 22 10:13:10 EDT 2002 | bdoyle
Sorry for the delayed response. Anyhow we currently don't have that feature. However there is a print buton on your browser that will print an entire page.
Electronics Forum | Mon Sep 16 17:17:02 EDT 2002 | bdoyle
Hello and sorry for the delayed response. We haven't made any changes to the system. Have you used your smtnet email anywhere? We are currently looking into some spam filters for our server.
