Electronics Forum | Fri Mar 10 13:50:42 EST 2006 | Frank
Contact your local Juki distributor. But as a reseller of used equipment they may not be too willing to help out. And why would you want to add the expense and hassle of adding a glue head on a machine?
Electronics Forum | Sun Mar 12 12:29:26 EST 2006 | Edward P. Woldendorp
Frank, Thank you for your reply. A customer in Russia asked us for this glue head. He runs a PM-570L machine. What would you advise him? Thank you and best regards, Edward
Electronics Forum | Sat Sep 18 08:55:46 EDT 2010 | joetfree
Hi All, i have io head unit kv8-m4570 with error: limit error. if you have operation manual or suggestion, please help us Thanks
Electronics Forum | Thu Aug 18 05:07:53 EDT 2011 | johndoe0222
I received an error on my fuji ip3 which is: "Placing head 1 nozzle has become detached." Does anyone have any idea what is going on and how to fix this. Thanks
Electronics Forum | Thu Aug 18 12:46:43 EDT 2011 | jdengler
In the center of the head shaft there is a rod that is used to flag 2 sensors at the top of the shaft. This lets the machine know when a nozzle is attached. Check that the sensors are working correctly and the rod moves freely. The sensors are fib
Electronics Forum | Sun Oct 21 05:48:09 EDT 2018 | ebelouet
HI, I search heads for MPI M380 machines or full machine ? Sincerely Eric
Electronics Forum | Wed Mar 22 08:02:17 EST 2006 | Edward P. Woldendorp
Frank, Thank you very much for your advice. Edward
Electronics Forum | Mon Sep 20 00:51:03 EDT 2010 | jeffr
This particular Yamaha Head I/O Board is a common failure. Yamaha supply an updated version which is less likely to fail. The cause of the problem that you see is due to the connectors on the flexing and damaging the inner layers of the board. The on
Electronics Forum | Thu Sep 13 17:29:02 EDT 2007 | fnorradd
I am currently having a problem with uncut legs on one side of axial components from a universal dual head insertion machine. Initially it was thought that the anvil on one side was engaging slow so I stripped down and changed the seals in the botto
Electronics Forum | Tue Mar 14 02:06:17 EST 2006 | Frank
Have him talk with the local distributor http://www.sovtest.ru or talk directly with Juki Automation Systems AG in Switzerland http://www.jas-smt.com