Electronics Forum | Thu Apr 19 08:29:59 EDT 2007 | davef
Look here: http://www.humiseal.com/cc_handbook/cchandbookpage4.html Maybe those dead-butts at Humiseal should pay us
Electronics Forum | Wed Apr 30 15:00:51 EDT 2008 | mikesewell
I believe Humiseal (and others) makes some water based coatings...www.humiseal.com Dymax has a no VOC UV cure if you have an adequate UV source.
Electronics Forum | Mon Jan 19 09:10:17 EST 2009 | stevewilde
Thank you for all of the advice. I am using the extended spray for these cards. Humiseal have recommended using their own thinners 600 instead, so will run some trials with this and also the humiseal pre-mixed material (at the moment we mix our ow
Electronics Forum | Tue Feb 24 13:17:59 EST 2009 | toolcrib
LOOKING FOR HUMISEAL 1C51 ANY SIZE CALL 242-246-7064 OR EMAIL LU.VARNELL@HS.UTC.COM
Electronics Forum | Thu Mar 01 16:09:33 EST 2007 | Steve
Just learned today that Humiseal will no longer be producing their HT-500 masking tapes or dots. Bummer, because their tape worked very well and left no residues even after baking. They say it was becoming so hard to get the raw material for their
Electronics Forum | Fri Sep 09 07:39:40 EDT 2005 | Slaine
we use humiseal for military a customer, in an aerosol can, gives good results
Electronics Forum | Thu Oct 06 10:09:24 EDT 2005 | jdumont
Humiseal 1B73 Acrylic, thanks for the suggestion.
Electronics Forum | Mon Jan 03 00:30:30 EST 2011 | raghu
Contact your distributor for the coating or > Humiseal directly. Humiseal has had a recent > issue with batches of 1B31. The specific problem > is lack of adhesion, which is what you have as > well. You need to find out if your batch # is one >
Electronics Forum | Sat Feb 24 09:49:26 EST 2018 | davef
+$3 / ounce * Humiseal 1B31 => ~$2.50 / ounce ... assuming same coverage thickness and that
Electronics Forum | Mon Jun 25 12:23:15 EDT 2007 | davef
Once the HumiSeal conformal coating has been applied to the printed circuit board it is usually best to allow the material to reach a touch-dry stage, before heating the board to accelerate the cure schedule. This avoids potential problems such as bu
