Electronics Forum | Sun Feb 01 17:28:24 EST 2009 | tpappano
The feeders on the CSM84 actually feed the tapes forward by the force of a spring. On the 8mm and 12mm feeders the spring is loaded directly by the force of the push rod on the placement head. With the larger tapes like 16mm and 24mm, a stronger sp
Electronics Forum | Tue May 01 13:52:51 EDT 2007 | jasont
plz advise if the below feeders are compatible on CSM 46/60 (are they downwards compatible?); 1. Philips series FV-84-xxxxxC, model PA2903/70 (2,4 pitch, 8mm) QTY=29 2. Philips series FV-82-7-xxxxD, model PA2903/73 0603-type (2,4 pitch, 8mm
Electronics Forum | Thu Aug 23 04:17:10 EDT 2007 | hannua
In the VIOS file between lines &B.MNT and &B.OPT you will find the index number (in hexadecimal, four digits just in front of the reference designator in each line) into the component and feeder table. The feeder table entries are designated with &F
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
Electronics Forum | Wed Mar 29 03:40:06 EST 2006 | Frank
The Juki 2060 can have both front and rear trolleys and you do not loose any feeder locations. My question was why can't the Assembleon put trolley on the rear? I recently visited a friend at a company that used a lot of Assembleon and compared run
Electronics Forum | Tue May 05 11:05:53 EDT 2015 | billmeye
Brian, thank you for taking time to discuss your buying experience, I read your link and it was very thorough. I also work for a small CEM using Mydata equipment. We have had Mydata going back to 1998 but truely are looking for something simpler. F
Electronics Forum | Fri Apr 30 10:42:40 EDT 2021 | oxygensmd
I have a customer who ask close to prototyping jobs with low volume and high-mix components. A regular job have around 5-30 pieces board but have high quantity and many type of components. All the time over 1000 pieces of parts on board from 250-350
