Electronics Forum | Tue May 19 13:53:53 EDT 2015 | dyoungquist
Parts will self align using Pb free paste as well. If your parts are not self aligning with Pb free paste, you have a problem with either your paste or the oven profile you are using.
Electronics Forum | Wed Feb 13 12:24:26 EST 2019 | aldrich17
Does anyone happen know where i can find an R alignment tool? Part number 5322 395 10879. Also a disassemble shaft tool. Part number 5322 395 10877
Electronics Forum | Fri Jun 19 06:18:41 EDT 2020 | vinitverma
Look for Philips Emerald (3 Phase supply) or it's predecessor Eclipse (single phase supply). It has 2 heads, Laser + Vision alignment (no mechanical alignment).
Electronics Forum | Sat Nov 06 06:41:11 EDT 2021 | ttheis
The DEK248 we had at one time was pretty compact but it did not have automated alignment- just a semi-manual camera/monitor stencil alignment process.
Electronics Forum | Wed Sep 08 19:29:43 EDT 1999 | Steve E ( Fuji America )
| We are using some Fuji machines and have trouble picking parts up from damaged or mis-adjusted feeders. When I was working with Panasonic machines I was able to buy a feeder alignment jig from them to align the pick spot in the feeder, but Fuji doe
Electronics Forum | Wed Aug 22 10:57:59 EDT 2001 | wbu
Hi Steven, BGA�s are known for their ability to self align and from own experiance they do. There�s enough documentation on this one available (...don�t have the links present like Dave but I�m sure he will give you enough to spend some evenings rea
Electronics Forum | Thu Dec 21 10:20:57 EST 2023 | jeana
Thanks for the quick reply :) We've used some classic feeders that we repurposed ourselves by switching the original optical barriers (index wheel and motor wheel) with twice the resolution. It gives okayish results, not great, but the 0402 is alig
Electronics Forum | Wed Jun 27 21:24:47 EDT 2001 | davef
Welcome. First, proper alignment can produce an order-of-magnitude increase in the number of boards that can be printed without wiping. The initial alignment can be made either by: * Peering through the stencil apertures at the board underneath and
Electronics Forum | Thu Jun 23 21:04:04 EDT 2005 | darby
If you have concluded that it is not a file storage problem you may wish to consider - When setting up a job the camera can move to virtually any position. This does not mean that the actuators on the stencil or board have enough travel to align the
Electronics Forum | Tue Apr 15 14:10:30 EDT 2003 | russ
here is how it is done. 1.Position the stencil in the machine. 2.Position the board onto the PCB tooling as close to being aligned with the stencil as you can. 3.Place mylar or some thin clear material over the board. your printer should have prov