Electronics Forum | Fri Jul 24 14:50:43 EDT 2015 | woodsmt
If you are buying this tooling, you need to ask yourself if you really need the OEM tooling. While it is definately required for come delicate and complex connectors, for a machine like the 6T, 95% of the time you can get away with a metal block. y
Electronics Forum | Sun Jul 19 23:19:47 EDT 2015 | langkeauto2015
We are one of the leading manufacturer of high speed led pick and place machine from Shenzhen ,China, during the communication with our foreign clients, we found that, many USA clients want desktop pnp machine ,rather than high speed model, we are wo
Electronics Forum | Tue Jul 21 04:53:10 EDT 2015 | langkeauto2015
Yes, i agree with you, but for our domestic market, most of big led light manufacturers which can use our machines already purchased our high speed led pnp machines, like FSL, MLS etc, it is necessary for us to explore foreign market, india and brail
Electronics Forum | Wed Jul 22 06:58:50 EDT 2015 | migliore
Hi, I got the answer from edaboard.com A standard 6-layer stack is using 2 cores. Manufacturing steps for standard 6-layer are: 1. Etch both (double side) core substrates 2. Assemble, press and cure the complete stack: - copper foil - prepr
Electronics Forum | Thu Aug 13 09:05:38 EDT 2015 | charliedci
Thanks Sr. Tech. I was beginning to wonder if we were the "first" to use their 3000 series machines (guinea pigs). We have 2 2080's, a 2060 and some older 700 series Juki P&P. We have been struggling a bit with component definitions and recognition
Electronics Forum | Wed Jul 29 12:14:30 EDT 2015 | davef
There is no current standard for the amount of flux that should be applied to a board. Current standards focus on what the result of a process should be, not how the process should be performed. So, the standard tells you that you need a procedure de
Electronics Forum | Tue Aug 04 14:56:27 EDT 2015 | sarason
Adding to my previous message this could be solved fairly easily for the general case with a jig made from 3.2 - 4mm aluminium aircraft grade plate. you would machine the bottom side edges to give a 1.6 mm thickness, then machine the top side to leav
Electronics Forum | Wed Aug 05 08:16:34 EDT 2015 | emeto
Hi, that's how it works: 1. Zoom to the object you want to start with. 2. Click S to center to the object. Depending on the zoom you can center to pad, line, corner.... 3. Click Z(this zeroes your Relative coordinates). If you click Ctrl+z(this ze
Electronics Forum | Tue Aug 04 12:11:56 EDT 2015 | bnorton
OS/2 UIC version 3.2.3 Powerup seems to go OK until, while the GUI says ...initializing..., an error popup appears saying "Did not receive request to load machine model within timeout period. Possible machine error condition exists. Do you want t
Electronics Forum | Sat Aug 08 09:45:11 EDT 2015 | edwaterfall01
It would be helpful to know what happened before the error occurred. Do you have another machine so that you can swap some boards? The Force CPU, (machine controller) located in the VME, is responsible for controlling all machine-related activities.