Electronics Forum | Mon Dec 17 14:16:44 EST 2007 | realchunks
This is funny. Poeple giving answers to a question that isn't specific. What if the shorts he is having are on the top of his board, caused by flooding or Omega wave too high?
Electronics Forum | Fri Dec 05 11:27:10 EST 2008 | patrickbruneel
Every problem faced with (all) lead free alloys can be solved with 2 words �add lead� I'll keep it short don't want to sound like a broken record.
Electronics Forum | Mon Oct 28 11:42:40 EDT 2013 | davef
Two most important parameters are: * Solder temperature is the temperature of the solder * Dwell time is the time that the board remains in contact with the molten solder Several things that you should consider are: * First, here's how to design an
Electronics Forum | Wed Dec 03 01:36:35 EST 2008 | lococost
Is anyone wave soldering 0603 leadfree succesfully? We have no problems soldering them leaded, but lead free we see a lot of random skips and some shorts. We use SAC. We have tried different fluxes, flux settings, playing around with preheat, sol
Electronics Forum | Thu May 11 18:59:40 EDT 2000 | lboone
Have anyone perform wave soldering on FR-2 and FR-1 printed circuit board with lead free soldering? Can you share the parameters(wave temperature,preheat temperature, contact time, wave height,etc,) used and did you do any changes to the wave solderi
Electronics Forum | Mon Dec 17 13:58:54 EST 2007 | ck_the_flip
I made my own wave measuring device using KIC2000 system. KIC2000 has automatic wave detection, so now I have a profiler for both reflow ovens and wave solder. The delmat carrier only cost $500. A guy, Samir, from this forum gave me the idea, actu
Electronics Forum | Fri Feb 21 10:59:15 EST 2020 | slthomas
I used to work for an OEM that made professional audio equipment (studio monitors, mixing boards, etc.). The mixers required precise alignment of LEDs, switches, and pots in the sheet metal so we used aluminum alignment fixtures during wave solder. T
Electronics Forum | Mon Dec 17 19:01:45 EST 2007 | bbarton
As someone with a LOT of experience with the "low cost" alternative alloys, primarily SACX, I have one simple question....Are these shorts a new phenomena? WAS your process in control, and all of a sudden it's not? If the answer is YES, take a look a
Electronics Forum | Thu May 09 17:28:33 EDT 2002 | davef
There is no IPC specification, nor should there be. * There are just too many peculiarities in the design and fabrication of PWB. * The issue is not defining how to store boards. The issue setting expectation for reliable products and allowing you th
Electronics Forum | Thu Nov 08 13:12:02 EST 2007 | russ
Annular rings are too big, it is acceptable to have shorts on the common conductors. I would be willing to say the "other" supplier may have modified the artwork as well. Good fluxing, preheat and proper immersion depth are key to eliminating short
Midwest Circuit Technology provides Carbide Router Bits and End Milling Cuters for use in PCB Depaneling equipment. We have over 35 years of supplying tools and machining experience in drilling, Routing, Test Fixture manufacture.
114 Barrington Town Square
Aurora, USA
Phone: 13309956900
.gif)
