Electronics Forum | Thu Mar 04 15:01:32 EST 2021 | proceng1
We used to have 5 of these in service and they worked great. Only 1 had the stencil wiper, and we did not utilize it. We've since installed all inline printers, but we do keep 1 MV100 on the floor as a back up. The firmware can get squirrely and the
Electronics Forum | Thu Nov 02 04:42:48 EDT 2023 | tinaheussaff
In general, it is safer to use a single alloy with a known composition and performance characteristics. If you need to change the alloy used in your selective soldering machine bath, it is advisable to consult with the manufacturer or a soldering exp
Electronics Forum | Sat Sep 29 10:10:05 EDT 2001 | foxy
I used to build the SMTech 100 range of machines before the company closed, and i also have dealings with them still. The 100is is a very capable machine and will go on forever with a little T.L.C. foxy
Electronics Forum | Wed Jun 20 15:56:33 EDT 2001 | Gil Zweig
For the applications you mention you would probably want to resolve details of at least 8 microns (0.0003") which would translate into a bare minimum resolution requirement of 60 to 100 line pairs per millimeter at a minimum geometric magnification o
Electronics Forum | Thu Aug 02 14:41:01 EDT 2001 | Roger
In the U.S. you cannot buy Yamaha machines. Assembleon (previously Phillips) exclusively markets Yamaha machines in the U.S. and names the machines after rocks. I think the YV100 is sold as either the Topaz or Sapphire by Assembleon.
Electronics Forum | Sun Aug 18 10:42:05 EDT 2002 | Benny
I am asking if is there a wirw wrap socket that can fit flex10k smt component [(epf10k10atc100-3) 100 pin]. or if is there thruhole flex10k ?
Electronics Forum | Wed Dec 04 20:24:49 EST 2002 | pychan
I would like to know : 1. Is the Assembleon GEM Topaz X-II SF is same as Yamaha YV100 II or YV 100 x Thanks fo your information
Electronics Forum | Fri Dec 26 12:02:37 EST 2003 | irun
hi all we are in the face of purchasing stencil printer and we are looking for off-line with vision model. We are interested in MPM stencil Ultraprint 100 and SPM. My question is about your experience with Ultraprint 100 and SPM? Which is better, mo
Electronics Forum | Wed Oct 13 21:27:04 EDT 2004 | KEN
YV100 is the sapphire? Right? I would run scan disk. You probably have a bad sector on the RAM DRIVE.
Electronics Forum | Sat Oct 16 08:42:47 EDT 2004 | raj_nz
hi yes it is YV100XT and its DOS base i think its vios is Version 2.10 japanese dos version