Electronics Forum | Fri Apr 23 02:15:36 EDT 2010 | smellew
Hi Rodrigo, Have you fixed your CP65? do you need some help? llew
Electronics Forum | Mon Apr 26 16:02:30 EDT 2010 | markhoch
Are the drive motors DC? Reverse polarity on the motors and switch your photosensors on the entry and exit end. You might have to play with the SMEMA connections a bit, but you'll figg it out. ;)
Electronics Forum | Fri Apr 30 03:36:46 EDT 2010 | aungthura
Hi All Pls advise me about vapor soldering machine if any1 have been using. Thanks in advance
Electronics Forum | Tue May 18 09:36:29 EDT 2010 | davef
OK. So, why do you have to heat it to 250*C to get it melt? What is the solderability protection on: * Board * Socket
Electronics Forum | Mon May 03 10:09:40 EDT 2010 | rmalick
get a TX1 error. Part remains in shuttle after getting a feeder mispick. machiune needs to br resert and we have to manually remove part from shuttle any idea how to eliminate this?
Electronics Forum | Wed May 05 14:01:46 EDT 2010 | leemeyer
Has anyone ever run across a specification for the sheer strength of a soldered BGA assembly. We are looking to qualify a process and would like to have a target number to shoot for. Thanks
Electronics Forum | Wed May 05 16:12:30 EDT 2010 | thanh
after calibration, now i'm having an issue that placement between lazer and camera off about .5mm on the Y mount. if parts go to camera, the placement are good. but parts that placing with lazer it off about .5mm at Y for all rotation. anyone seen t
Electronics Forum | Sun May 16 00:07:58 EDT 2010 | tpappano
I have a Philips CSM84VZ. There are offset calibrations that compensate the X and Y distances from the camera to the heads and the beam pointer. Perhaps yours is similar and just needs a small Y adjustment for the beam pointer.
Electronics Forum | Tue May 18 16:17:46 EDT 2010 | smttechnologies
I have a unit in our shop that I don't know if it works or not. You can try it out if you like.
Electronics Forum | Thu May 13 03:20:36 EDT 2010 | aungthura
it is true.My supplier only sell the sodler paste in Jar,1 jar must have 500g( minimum), although we wanted 250g par jar.
