Electronics Forum | Wed Mar 10 15:09:34 EST 2004 | Jay
You can say "re-flow". It's related with the process. In order to assemble a PC Board containing lots of components such as PTH (Plated Through Hole) and SMT, usually, PTH type packages and components are soldered first using wave soldering process.
Electronics Forum | Wed Dec 24 15:28:17 EST 2008 | edmentzer
We use SN100C for wave soldering and hand Lead free soldering and have had very good results. The wire cored solder for hand soldering flows good and makes very good solder joints. The SN100C in the wave solder machine also works very good. We use
Electronics Forum | Thu Jul 20 12:21:05 EDT 2000 | Dave F
Bob: Some people suggest different lead-free solder formulations for wave, reflow, and hand soldering. * What are your thoughts on this? * What are the factors that contribute to using different lead-free solder formulations for wave, reflow, and
Electronics Forum | Tue Jun 10 10:58:54 EDT 2003 | Frank
Hi, I currently work on SMT department to uptimize all process. I've just selected the solder paste after testing 15 different products. To be able to do that, I had to create a procedure to evaluate each paste and to be sure that my profil was per
Electronics Forum | Thu Mar 08 19:30:22 EST 2007 | Lignie
We are currently using the solder on our waves, and our boards are for TV applications. Tested the solder before we mass prod, eg. 3000 cycles reliability test.
Electronics Forum | Tue Aug 05 17:19:18 EDT 2003 | Kris
Hi, Have you tried increasing the vibration at the main wave or using a chip wave? try increasing the temperature of the solder by about 10 Deg C.
Electronics Forum | Mon Nov 06 21:09:47 EST 2000 | Dave F
That's cool that you used the Archive. Consider running a designed experiment on your board, using your flux and solder, the limits from the Archive, and on your machine to dial in the spread in dwell numbers you see in the SMTnet Archives to your s
Electronics Forum | Mon Jun 26 05:45:58 EDT 2000 | Allan Ringgaard
Where can i find some information about wave solder land patterns...? I�m especially looking for how to prevent solderbridges (with solder thief) on diffrent componet types (only leadede, no SMD). So if anyone know where to find any reading on the
Electronics Forum | Thu Sep 09 11:17:59 EDT 1999 | Glenn Robertson
| Has anybody have any experience with Top placement of BGA's. GLue descretes on bottom and then wavesolder.? | | | Chris - This is a common practice. Just remember that BGA solder joints are especially susceptible to secondary reflow damag
Electronics Forum | Sun Jan 24 10:49:38 EST 1999 | Ng
It has been known that sufficient cooling after soldering is important in order to get a stronger joint during its solidification stage. And it has been so much emphasised with reflow oven. But, why many models of wave soldering machine do not come w
Global OEM manufacturer of selective wave soldering machines. With a world-wide install base in over 65 countries, we are a global leader in the selective soldering space. Highly customized solutions available in all industries.
Training Provider / Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions
201 N Lively Blvd
Elk Grove Village, IL USA
Phone: 7148533287
