Electronics Forum | Thu Aug 17 12:38:57 EDT 2006 | finalassy
What type of water soluable flux are you running in you selective solder machines? I know that we had to replace the ruby that the solder shoots through at the top of the fluxer once because of crystalization. That was not a cheap replacement. Doe
Electronics Forum | Sat Aug 19 08:01:39 EDT 2006 | johnw
I am experiencing the same problem just now on one of my FCP643 machine only when I change program and the machine moves to load position to clamp the board, as soon as I get to the bottom of this I will let you know.I suspect its the Z-AXIS loader c
Electronics Forum | Sat Aug 19 08:14:25 EDT 2006 | johnw
I am experiencing the same problem just now on one of my FCP643 machine only when I change program and the machine moves to load position to clamp the board, as soon as I get to the bottom of this I will let you know.I suspect its the Z-AXIS loader c
Electronics Forum | Sat Aug 19 20:04:22 EDT 2006 | jorge maldonado
well, the problem we have is with the shaft cam (in the mtu), when the machine moves the trays upward there is a vibration that moves to the components, we need change the shaft cam, but meanwhile we replace it I need to control this problem and I be
Electronics Forum | Wed Sep 06 09:11:12 EDT 2006 | kkovachy
Cmiller is correct are not going to find a better machine for the price. Also I have used several different AOI platforms and the Yestech is hands down the easiest to program. Keep in mind that changing platforms is expensive. Operators, programmer
Electronics Forum | Mon Aug 28 14:18:21 EDT 2006 | russ
Sounds like your PCBs are now white tin. Change this to another roHS compliant finish and see if prob goes away. You must get control of the materials that you are being asked to build. Your Customer needs your advice on surface finishes, they sho
Electronics Forum | Fri Sep 01 08:50:19 EDT 2006 | Cmiller
Actually I think the cyclical nature of the business does not fit Dovers model very well. They sold a number of companies from thier portfolio. The new owners are supposed to make some significant investments in Universal so it may very well be a goo
Electronics Forum | Wed Sep 20 15:56:44 EDT 2006 | Rapid
There is a quick change dedicated tooling solution. It involves a "h-tower" and a machined vacuum (or non-vacuum) plate. There are two 8mm threaded holes on the table that are there for support tooling interface. The tower or tooling bolts to thos
Electronics Forum | Fri Sep 08 10:23:38 EDT 2006 | slthomas
By profile (profile has not been changed) are you referring to the oven zone settings or the actual charted profile of a trip through the oven as recorded by a thermal profiler? Some ovens will continue to function without warning as long as temps
Electronics Forum | Fri Sep 08 11:32:19 EDT 2006 | darburch
Solder joint too shiny, clock wrong color, she's got my chair, radio too loud, can't hear the radio, I'm too hot she's too cold change the A/C.Kindergarten wasn't this petty.OH, wait this is a heath and safety issue, I need the day off with pay. Why
